# ADG-L-1000-45-15 Preen DC Power Supply New

## Key Features at a Glance

-   Output power 5 kW / 10 kW / 15 kW per chassis; up to 75 kW via parallel (5 units)
-   Output voltage 0–30 V to 0–1000 V; up to 0–2000 V via series connection (2 units)
-   Currents up to 510 A; up to 2550 A via parallel
-   CV / CC / CP operating modes; built-in programming (4 modes, up to 200 steps)
-   Auto Range models provide 3× lower-voltage / higher-current operation
-   Power factor up to 0.99 with active PFC
-   Standard RS-232 / RS-485 / Ethernet / USB / Analog; optional GPIB
-   Optional I-V Curve Simulation and Remote Control Software; optional Reverse Current Protection Module

## ADG-L-1000-45-15 — Programmable DC Power Supply (15kW/1000V/45A Auto Range)

In summary, the Preen ADG-L-1000-45-15 is part of the ADG-L Series, a high-density programmable DC power supply available in 5 kW, 10 kW, and 15 kW chassis with output voltage from 30 V to 1000 V (up to 2000 V via series) and currents up to 510 A (up to 2550 A via parallel).

The Preen ADG-L Series is a high-density programmable DC power supply available in 5 kW, 10 kW, and 15 kW chassis with output voltage from 30 V to 1000 V (up to 2000 V via series) and currents up to 510 A (up to 2550 A via parallel). Built on PWM and DSP control with 3U rack form factor, ADG-L delivers ≤ 5 ms transient response, ≤ 0.03 % line regulation, and full programmability for renewable-energy, EV, and protection-component test applications.

### What is the ADG-L-1000-45-15 used for?

The ADG-L-1000-45-15 is used across photovoltaic inverter testing, electric-vehicle component test, battery emulation, DC/DC converter R&D, fuse and air-circuit-breaker verification, AI-server and data-center power-module validation. Specific test methodologies include Solar Array Simulation, static & dynamic MPPT efficiency validation, programmable DC pulse and slew-rate playback, and protection-component overcurrent testing.

### Where does the ADG-L-1000-45-15 fit in a typical lab workflow?

The ADG-L-1000-45-15 integrates into bench, ATE, and high-power production environments through standard RS-232, RS-485, Ethernet, and USB control. Engineers use it to repeatably simulate global mains and DUT operating conditions during design verification, certification pre-compliance, and end-of-line testing — replacing manual variac/MG-set configurations and improving test repeatability and data capture.

From a measurement standpoint, the ADG-L Series is benchmarked against EN 50530, SAS (Solar Array Simulation); RoHS Compliant; CE Marked. Within this product line the ADG-L-1000-45-15 delivers the variant-specific output described in this model's specification block below — chosen to match the most common DUT power, voltage, and frequency requirements in the target application.

Preen (AC Power Corporation, founded 1989) is one of the world's highest-volume programmable power-source manufacturers, with ISO 9001:2015 certified manufacturing facilities in Taipei, Tianjin, and Suzhou, and a U.S. service center in Irvine, California. Preen products carry CE and RoHS certifications and have been recognized with multiple Taiwan Excellence Awards for the AFV, AFV-P, and ADG-P product lines — placing the brand in the established commercial tier alongside California Instruments, Chroma, and Pacific Power Source.

### How does it compare to alternative AC/DC sources?

-   Compared with California Instruments and Pacific Power Source: Preen typically offers 10–20% lower pricing with strong multi-phase capability — ideal for budget-conscious compliance labs and three-phase applications.
-   Compared with Chroma 61800 series: Preen provides comparable programmability and broader high-power three-phase coverage at competitive ASP.
-   For avionics 400 Hz testing, Preen frequency-converter options (AFC) and AFV+ Type-C 300–840 Hz cover MIL-STD-704 / DO-160 workflows.

## Accessories Supplied

-   AC input power cable
-   Operation manual
-   PC remote control software (Preen Program)
-   Calibration certificate (when applicable)

## Specifications

Specifications below are for the ADG-L Series. The ADG-L-1000-45-15 variant within this series is configured as: **Programmable DC Power Supply (15kW/1000V/45A Auto Range)**.

Specification

Value

**AC Input**

1Ø/3Ø 187–264 Vac or 3Ø 340–460 Vac (model-dependent); optional 3Ø4W+G 340–528 Vac

**Input Frequency**

47–63 Hz

**Input Power Factor**

≥ 0.99 at max power

**DC Output Voltage**

30 V to 1000 V (model-dependent); up to 2000 V via series

**DC Output Current**

Up to 510 A per unit; up to 2550 A via parallel

**Voltage Ripple (RMS)**

≤ 0.05–0.3 % F.S. (model-dependent)

**Load Regulation**

≤ 0.1–0.3 % F.S.

**Rise Time / Fall Time**

≤ 8–90 ms / ≤ 3–45 ms (full load, model-dependent)

**Transient Response**

≤ 5 ms

**Operating Modes**

CV / CC / CP

**Efficiency**

≥ 87–90 % at max power

**Auto Range**

3× extended operation on selected models

**Parallel / Series**

Parallel up to 5 units; Series up to 2 units

**Protections**

OVP, OCP, OPP, OTP, Vin OV, Vin Unbalance, LDC OV

**Remote Interfaces**

Standard: RS-232 / RS-485 / Ethernet / USB / Analog · Optional: GPIB

**Operating Temperature**

0 °C to 40 °C

**Dimensions (3U)**

132 × 442 × 692–731.5 mm (5.2 × 17.4 × 27.2–28.8 inch)

## Unit Options

The ADG-L-1000-45-15 accepts the following factory-installed options. Multiple options may be selected.

_(select all that apply — multi-select)_

-   **ADG-L-008** — Multiple Units Connection Cord DB25 (Male × 2) 50 cm
-   **ADG-L-013** — GPIB Interface Board
-   **ADG-L-014** — Reverse Current Protection Module
-   **ADG-L-015** — I-V Curve Simulation and Remote Control Software
-   **ADG-L-017** — Input Voltage 3Ø4W+G 340–528 Vac (115 V output models and above)
-   **ADG-L-018** — Remote Control Box

## Calibration Options

Factory calibration is provided with each new ADG-L-1000-45-15 per the manufacturer's datasheet. Additional ISO 17025-accredited or Z540.1 calibration upgrades are available on request — contact your Test Architect to scope.

This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.

## Details

- **Price:** 8880.0 USD
- **Vendor:** Preen
- **Type:** Dc Supply
- **Tags:** 3u, adg-l, ADG-L Series, adg-l-1000-45-15, analog, auto-range, battery-test, ce-marked, DC Power Supply, en-50530, ethernet, ev-test, gpib, Manufacturers, mppt, parallel-connection, Power Supplies & Loads, Preen, product_manual_group_1, product_manual_group_3, Product_new, programmable-dc, rack-mount, rohs-compliant, rs232, rs485, series-connection, solar-array-simulation, usb

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 8880.00 USD | In stock |

## Images

- ADG-L-1000-45-15 Preen DC Power Supply New

---

> Source: [ValueTronics](https://valuetronics.com/products/adg-l-1000-45-15-preen-dc-power-supply-new)
> Updated: 2026-05-28