# Tektronix 80E10 50 GHz Dual-Channel TDR Sampling Module (Remote Sampler) (Pre-Owned) # Tektronix 80E10 50 GHz Dual-Channel TDR Sampling Module (Remote Sampler) (Pre-Owned) ## Key Features At A Glance - Industry's only sampling oscilloscope mainframe supporting up to 8 input channels across 6 module slots - Modular architecture accepts electrical, optical, TDR, clock-recovery, and phase-reference plug-in modules - 14-bit vertical resolution with a measurement system offering over 100 automated measurements - Standard time-base jitter 800 fsRMS typical; below 200 fsRMS typical with optional 82A04 Phase Reference module - Four color-graded, variable-persistence waveform databases of up to 4 G waveform points each - GPIB, 10/100Base-T LAN, RS-232-C, USB 2.0, and parallel port for remote control and automated test - Built-in automated ITU/ANSI/IEEE mask testing for SONET/SDH, Fibre Channel, and Ethernet standards - Windows XP platform with OpenChoice software for third-party application integration The Tektronix DSA8200 is a Digital Serial Analyzer sampling oscilloscope built for communication signal analysis, TDR/TDT and serial data network analysis, and the acquisition and measurement of repetitive ultrafast signals. It combines world-class waveform acquisition technology with an extensible modular architecture, delivering high-performance TDR and interconnect analysis, accurate analysis of signal impairments, and BER calculations for current and emerging serial data technology used to develop high-speed serial devices. Tektronix positions the DSA8200 for design and verification of telecom and datacom components and systems, and for manufacturing and testing to ITU/ANSI/IEEE and SONET/SDH compliance. Other named applications include high-performance true-differential TDR measurements; advanced jitter, noise, and BER analysis; impedance characterization and network analysis for serial data applications including S-parameters; and channel and eye-diagram simulation with measurement-based SPICE modeling. ValueTronics stocks and holds its own inventory in a secure 20,000-square-foot warehouse at 1675 Cambridge Drive in Elgin, Illinois, so the equipment we list is equipment we physically control. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. Backed by experienced test-and-measurement specialists, we help you match the right mainframe-and-module configuration to your application and stand behind every order. ## Compare Other Models in This Series The DSA8200 is a single sampling-oscilloscope mainframe whose measurement capability is defined by the plug-in modules installed in its six slots. Tektronix offers families of electrical sampling modules, true-differential TDR modules, multirate optical modules, clock-recovery modules, and accessory modules, so one mainframe can be configured for electrical, optical, TDR, and serial-data-link work. The modules differ primarily in bandwidth, supported data rates, channel count, and connector type. Because the mainframe accommodates up to four dual-channel electrical modules and up to two optical sampling modules — eight acquired channels maximum — the same DSA8200 can be tailored from general high-speed electrical characterization to 100 Gb/s optical compliance testing simply by changing modules. The comparison table below summarizes how the available modules differ in bandwidth, rise time, noise, and supported rates. Each pre-owned configuration listed below is its own dedicated product page with condition-matched pricing. Select the mainframe and module combination that fits your application, and review the specifications on each page to confirm the bandwidth, data rate, and channel count you need. The DSA8200 supports long record-length acquisitions — up to 1,000,000 points with IConnect and up to 3,200,000 points with 80SJNB Jitter, Noise, and BER Analysis software — and provides the communications-tailored measurement set for serial data, TDR, and signal-integrity work. Within the electrical sampling module family, bandwidth ranges from 20 GHz (80E03, 80E04) through 30 GHz (80E07, 80E08) up to 50, 60, and 70+ GHz (80E01, 80E09, and 80E06 respectively), with the corresponding step-response rise times and RMS-noise figures shown in the comparison table. The 80E07, 80E08, 80E09, and 80E10 use fully integrated 2-meter remote samplers, while the 80E01, 80E03, 80E04, and 80E06 can use an optional 80N01 2-meter extender cable. The 80E10, 80E08, and 80E04 add true-differential TDR step generation for impedance and S-parameter characterization. The optical sampling modules differ by supported data rate and wavelength coverage: the 80C07B covers 155 Mb/s to 2.5 Gb/s, the 80C08C, 80C11, and 80C12 address rates around 10 Gb/s, the 80C14 extends to 14 Gb/s, and the 80C10B and 80C25GBE cover 40 Gb/s and 100 Gb/s testing. Clock-recovery support, optical reference-receiver filtering, mask-test sensitivity, and bandwidth differ by module as detailed in the comparison table. Model Type Bandwidth Channels **80E10** TDR Sampling Module 50/40/30 GHz 2 DSA8200 Sampling Oscilloscope Mainframe — 8 max 80C07B Optical Sampling Module 2.5 GHz 1 80C08C Optical Sampling Module 10 GHz 1 Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Product Core & Specifications Specification Value Electrical Sampling Module Application Type True-differential TDR, S-parameters and fault isolation Number of Channels 2 Bandwidth 50/40/30 GHz (user selectable) Rise Time (10-90%) 7 ps Input Impedance 50 ±1.0 Ω Channel Input Connector 1.85 mm female, precision adapter to 2.92 mm included with 50 Ω SMA termination Dynamic Range 1.0 Vp-p Offset Range ±1.1 V Maximum Operating Voltage ±1.1 V Maximum Nondestruct Voltage, DC+ACp-p 2.0 V Vertical Number of Digitized Bits 14 bits full scale Vertical Sensitivity Range 10 mV to 1.0 V full scale DC Vertical Voltage Accuracy ±\[2 mV + 0.007 (Offset) + 0.02 (Vertical Value – Offset)\] RMS Noise 50 GHz: 600 µV (≤700 µV); 40 GHz: 370 µV (≤480 µV); 30 GHz: 300 µV (≤410 µV) Remote Sampler Yes, fully integrated 2-meter cable TDR System TDR System Incident Rise Time 12 ps TDR System Reflected Rise Time 15 ps TDR Step Amplitude 250 mV (polarity of either step may be inverted) TDR Step Deskew Range ±250 ps TDR Sampler Deskew Range ±250 ps TDR Step Maximum Repetition Rate 200 kHz S-parameter Measurement Bandwidth 50 GHz Physical Characteristics Dimensions (W x H x D) 55 mm / 2.2 in. x 25 mm / 1.0 in. x 75 mm / 3.0 in. Net Weight 0.175 kg / 0.37 lb. > **Important:** The 80SJNB Jitter, Noise, and BER Analysis software requires the 80A06 PatternSync module. > **Important:** This product comes backed by a one-year warranty as standard. > **Important:** Clock recovery for the 80C12 Optical Sampling module is provided through the 80A05 module or CR125A, CR175A, or CR286A instruments (sold separately). > **Important:** Clock recovery for the 80C10B and 80C25GBE is provided by the CR286A-HS or other compatible external CR units (sold separately). > **Important:** An optional 2-meter extender cable (80N01) is available for the 80E06, 80E04, 80E03, and 80E01 modules (not compatible with the 80E10, 80E09, 80E08, or 80E07 modules). > **Important:** The P80318 and P8018 handheld TDR probes are especially designed to work with the 80A02 module for control of EOS/ESD protection (two 80A02 modules required for differential applications). > Recommended pairing: pair the 80A02 EOS/ESD Protection module with the P8018 or P80318 handheld TDR probes to protect the sampling module inputs during electrical TDR circuit-board and cable testing. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - **Vendor:** Tektronix - **Type:** Module - **Tags:** 80E10, Dig Oscilloscope, Inc., Manufacturers, Model 8010, Module, Other Equipment, Pre-Owned, product_manual_group_3, Product_used, Tektronix ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 0.00 USD | In stock | ## Images - Tektronix 80E10 50 GHz Dual-Channel TDR Sampling Module (Remote Sampler) (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/80e10-tektronix-module-used) > Updated: 2026-06-03