# Tektronix TAP2500 2.5 GHz Active Probe (Pre-Owned) # Tektronix TAP2500 2.5 GHz Active Probe (Pre-Owned) ## Key Features At A Glance - Single-ended active FET probes with bandwidth from 2.5 GHz to 3.5 GHz across the series - ≤0.8 pF input capacitance and 40 kΩ input resistance to minimize loading on the device under test - 10:1 attenuation with –4 V to +4 V input dynamic range and –10 V to +10 V DC offset range - Connects directly to DPO7000 and DPO4000 Series oscilloscopes via the TekVPI probe interface - DUT attachment accessories connect to SMDs as small as 0.5 mm pitch - Compact probe head for probing small-geometry circuit elements - ±30 V (DC + pkAC) maximum non-destruct input voltage - Automatic units scaling and readout on the oscilloscope display through TekVPI The TAP2500 and TAP3500 are single-ended active FET probes engineered to deliver truer signal reproduction and fidelity for high-frequency measurements. Built around an ultra-low input capacitance and a dedicated probe interface, they address three traditional probing problems: lowering DUT loading effects, providing versatile connectivity for attaching to small surface-mount devices, and preserving oscilloscope bandwidth at the probe tip for DPO7000 and DPO4000 Series oscilloscope models up to 3.5 GHz. These active probes are intended for the verification, debug, and characterization of high-speed designs, as well as signal integrity, jitter, and timing analysis. They also serve manufacturing engineering and test, and are suited to measuring signals with voltage swings up to 8 Vpk-pk. ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit we sell is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. Operating since 1992, ValueTronics keeps a deep, ready-to-ship selection of test and measurement equipment on hand so engineers can source the right instrument quickly. ## Compare Other Models in This Series The TAP2500 and TAP3500 form a two-model line of single-ended active FET probes that share a common architecture and interface while differing in bandwidth and rise time. Both are built for high-speed signal acquisition with ultra-low input capacitance and a TekVPI connection to compatible host oscilloscopes. Across the line, the probes deliver the same ≤0.8 pF input capacitance, 40 kΩ input resistance, 10:1 attenuation, and –4 V to +4 V input dynamic range. The distinction between the two models is the bandwidth and rise-time tier each one targets. Each pre-owned model below is its own dedicated product page with condition-matched pricing. Select the bandwidth tier that fits your application, and review that model's page for its specific pre-owned availability and specifications. The two models separate on headline speed: the TAP2500 provides a probe-only bandwidth of ≥2.5 GHz with a rise time of <140 ps, while the TAP3500 extends to ≥3.5 GHz with a faster rise time of <130 ps. All other electrical and mechanical characteristics — input capacitance, input resistance, attenuation, dynamic and offset ranges, and maximum input voltage — are common to both. Use the comparison table below to match the bandwidth and rise-time tier to your application; the two models are otherwise identical in their input and mechanical specifications. Model Bandwidth Rise Time Attenuation **TAP2500** ≥2.5 GHz <140 ps 10:1 TAP3500 ≥3.5 GHz <130 ps 10:1 Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Y-Lead Adapter (2 each) and 3-inch ground lead (3 each) — 1 set (Reorder 196-3456-xx) - SMT KlipChip Adapter — 2 each (Reorder 206-0364-xx) - Customizable Ground Lead (set of 5) — 1 set (Reorder 196-3482-xx) - Color Band Kit (5 colored pairs) — 1 set (Reorder 016-1315-xx) - Pogo Pin Ground (set of 10) — 1 set (Reorder 016-1772-10) - Square Pin Socket (set of 10) — 1 set (Reorder 016-1773-10) - Push-in Probe Tip (set of 10) — 1 set (Reorder 131-5638-11) - Right-angle Adapter (set of 10) — 1 set (Reorder 016-1774-xx) - SureToe Adapter (set of 4) — 1 set (Reorder 131-6254-xx) - Antistatic Wrist Strap — 1 each (Reorder 006-3415-xx) - Nylon Carrying Case — 1 each (Reorder 016-1952-xx) - Plastic Accessory Case — 1 each (Reorder 006-7164-00) - Instruction Manual — 1 each (Reorder 071-1836-xx) ## Product Core & Specifications Specification Value Characteristics Bandwidth (probe only) ≥2.5 GHz Attenuation (probe only) 10:1 Rise Time (probe only) <140 ps Input Capacitance ≤0.8 pF Input Resistance 40 kΩ Input Dynamic Range –4 V to +4 V Input Offset Range –10 V to +10 V Max Input Voltage (non-destruct) ±30 V (DC + pkAC) Propagation Delay 5.3 ns Physical Characteristics Width 7.6 mm (0.30 in.) Height 7.6 mm (0.30 in.) Depth 57.2 mm (2.25 in.) Cable Length 1300 mm (51 in.) Net Weight 0.091 kg (0.2 lbs, probe only, using ME lab scale) Power Requirements Power Powered directly by the DPO7000 and DPO4000 Series Oscilloscopes using TekVPI probe interface Environmental Temperature, Operating 0° C to +50° C Temperature, Non-operating –40° C to +71° C Humidity, Operating 5% to 95% RH at up to +30 °C; 5% to 85% RH above +30 °C up to +50 °C; non-condensing Humidity, Non-operating 5% to 95% RH at up to +30 °C; 5% to 85% RH above +30 °C up to +75 °C; non-condensing Altitude, Operating Up to 4,400 m (15,000 feet) Altitude, Non-operating Up to 12,192 m (40,000 feet) Regulatory Emissions Compliance EN 55011, Class A Compliance Labeling C-Tick (Australia/New Zealand), CE (European Union), WEEE (European Union) > **Important:** Maximum input voltage (non-destruct): ±30 V (DC + pkAC). > **Important:** The TAP2500 and TAP3500 are powered directly by, and require, a Tektronix DPO7000 or DPO4000 Series oscilloscope with the TekVPI probe interface; the probes do not operate standalone. > Recommended pairing: use the TAP2500 or TAP3500 with DPO7000 or DPO4000 Series oscilloscopes equipped with the TekVPI probe interface, which also supplies probe power. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - ValueTronics warranty included. - Functional verification included. - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - **Vendor:** Tektronix - **Type:** Act Prob - **Tags:** Act Prob, Active, Inc., Manufacturers, Model 2500, Other Equipment, Pre-Owned, Probe, product_manual_group_3, Product_used, TAP2500, Tektronix ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 0.00 USD | In stock | | NIST Traceable with Full Data | 0.00 USD | In stock | | ISO IEC 17025 Accredited | 0.00 USD | In stock | ## Images - TAP2500 Tektronix Active Probe --- > Source: [ValueTronics](https://valuetronics.com/products/tap2500-tektronix-active-probe-used) > Updated: 2026-06-02