# Rohde & Schwarz SMA100B RF and Microwave Signal Generator (Pre-Owned)

# Rohde & Schwarz SMA100B RF and Microwave Signal Generator (Pre-Owned)

## Key Features At A Glance

-   Frequency coverage from 8 kHz up to 67 GHz across the series, set by the installed frequency option
-   LAN (10/100/1000BASE-T) standard; GPIB (IEEE-488.2), USB 2.0, and RS-232 remote control available via option
-   SCPI command set with selectable compatible command sets to drop into existing automated test systems
-   Touchscreen GUI; choice of 2 HU (5-inch) or 3 HU (7-inch) display housing
-   Optional analog modulation (AM, FM, φM, pulse) plus optional chirped-pulse generation for radar test
-   Optional avionics modulation suite (VOR, ILS, marker beacon, ADF)
-   Optional OCXO, low-phase-noise, and ultra-low-phase-noise reference oscillator upgrades
-   Optional differential clock synthesizer and R&S NRP power-sensor analysis

The Rohde & Schwarz R&S SMA100B is an RF and microwave signal generator. Rohde & Schwarz positions it around four design priorities: the purest possible signals, the lowest harmonic and nonharmonic signal components, very high output power, and ergonomic operation. The instrument is built on a configurable platform whose frequency reach, output power, modulation capability, and reference performance are determined by the options installed at order time.

A signal generator produces a known, controllable RF or microwave signal used to stimulate a device under test so its response can be characterized. As a stimulus instrument, the R&S SMA100B is designed to integrate into automated test systems, where its SCPI command set and selectable compatible command sets let it emulate earlier-generation generators without rewriting test software. Optional capabilities extend it to avionics navigation-aid signal generation (VOR, ILS, marker beacon and ADF), to radar-oriented work through chirped-pulse generation and user-defined pulse trains, and to power measurement through R&S NRP power-sensor analysis.

We stock instruments ourselves in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, which lets us control availability and condition directly rather than relaying orders to a third party. Pre-owned units are inspected and functionally verified in-house before they ship, while new units ship factory-sealed, exactly as received from the manufacturer.

## Brand Heritage

Rohde & Schwarz is an independent, privately held electronics company headquartered in Munich, Germany, founded more than 80 years ago. It has operated under the Rohde & Schwarz name without a major corporate name change or acquisition.

## Accessories Supplied

-   Power cable
-   Quick start guide

## Product Core & Specifications

> **Important:** An ultra-high-power output option requires the corresponding high-power option to be installed.

> **Important:** The base unit can only be ordered with an R&S®SMAB-B1xx frequency option and an R&S®SMAB-B92 or R&S®SMAB-B93 platform height option. A frequency option and a platform height option are both prerequisites for use.

> **Important:** Only one of the following six reference/phase-noise options can be installed: R&S®SMAB-B1H, R&S®SMAB-B709, R&S®SMAB-B710, R&S®SMAB-B710N, R&S®SMAB-B711, R&S®SMAB-B711N.

> **Important:** RS-232 remote control requires the recommended extra R&S®TS-USB1 USB serial adapter.

> **Important:** All digital inputs and outputs are CMOS 3.3 V unless otherwise noted; the input damage level is below –0.5 V or above +5 V.

> Recommended pairing: the optional power analysis function (R&S SMAB-K28) works with R&S NRP-Z81, -Z85, and -Z86 power sensors for pulse and power-versus-time measurements.

## About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

-   Warranty included
-   Functional verification included
-   Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
-   Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 0.0 USD
- **Vendor:** Rohde & Schwarz
- **Type:** Rf Gen
- **Tags:** Manufacturers, Model 100, Pre-Owned, product_manual_group_3, Product_used, RF, Rf Gen, Rohde & Schwarz, Rohde & Schwarz GmbH & Co. KG, Signal Generators, SMA100, SMA100B

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 0.00 USD | In stock |

## Images

- Rohde & Schwarz SMA100B RF and Microwave Signal Generator (Pre-Owned)

---

> Source: [ValueTronics](https://valuetronics.com/products/sma100b-rohde-schwarz-rf-generator-used)
> Updated: 2026-06-02