# Anritsu MT8862A Wireless Connectivity Test Set (Pre-Owned)

# Anritsu MT8862A Wireless Connectivity Test Set (Pre-Owned)

## Key Features At A Glance

-   Supports IEEE 802.11a/b/g/n/ac/ax across 2.4 GHz and 5 GHz bands for RF TRx characterization
-   Network Mode establishes standard WLAN protocol connection with DUT — measures performance under realistic operation conditions without dedicated test mode
-   Operates as access point or station, with WEP, WPA-Personal, and WPA2-Personal security (with MX886200A-020 option)
-   Frequency coverage 2.4 GHz to 2.5 GHz and 5.0 GHz to 6.0 GHz with MT8862A-001 installed
-   Receiver input level range −65 to +25 dBm; transmitter output range −120 to 0 dBm
-   Optional 2×2 MIMO receiver sensitivity and transmit power measurement using two units (IEEE 802.11n/ac only, MX886200A-010)
-   Built-in frame capture logging in \*.pcap format for troubleshooting DUT connection problems
-   Web browser GUI with DHCP client support — no version-matching concerns between PC software and main frame firmware

The Anritsu MT8862A Wireless Connectivity Test Set is a benchtop instrument designed for measuring the RF transmit and receive characteristics of WLAN equipment. It uses standard WLAN protocol messaging — referred to as WLAN signalling — to establish a network connection with the device under test before performing RF measurements. This Network Mode capability, together with support for Direct Mode, is the central architectural feature of the platform.

Anritsu identifies the MT8862A's intended applications as design verification and manufacturing inspection of WLAN devices, with end-customer device types including smartphones, tablets, smart appliances, wearable devices, gateways, automotive electronics, and smart grid equipment. The instrument supports both AP-side and STA-side testing: it can simulate an access point to test station-mode devices such as smartphones and PCs, or simulate a station to test access points, routers, and gateways. Over-the-Air (OTA) test setups using anechoic and reverberation chambers are also supported, with Anritsu noting alignment to CTIA and Wi-Fi Alliance CWG recommendations for Total Radiated Power and Total Isotropic Sensitivity measurements.

## Brand Heritage

Anritsu Corporation traces its origins in Japan to 1895 and entered the North American RF and microwave market significantly through its 1990s acquisition of Wiltron, the U.S. network analyzer specialist. Today Anritsu operates as a global precision measurement company headquartered in Atsugi, Japan, with strong installed bases in wireless infrastructure, cellular base station test, and avionics radio test.

## Accessories Supplied

-   Power Cord: 1
-   DVD (Operation Manual): 1

## Product Core & Specifications

Category

Specification

Receiver

Frequency Range

2.4 GHz to 2.5 GHz, 5.0 GHz to 6.0 GHz (with MT8862A-001 installed)

Frequency Setting Resolution

1 Hz

Frequency Accuracy

Depends on reference oscillator accuracy

Level Setting Range

−65 to +25 dBm

Level Setting Resolution

0.1 dB

Level Accuracy (300 kHz BW, 2.4–2.5 GHz)

±0.7 dB (−30 dBm ≤ Setting Level ≤ +25 dBm); ±0.9 dB (−55 dBm ≤ Setting Level < −30 dBm); ±1.1 dB (−65 dBm ≤ Setting Level < −55 dBm)

Level Accuracy (300 kHz BW, 5.0–6.0 GHz)

±0.7 dB (−30 dBm ≤ Setting Level ≤ +25 dBm); ±0.9 dB (−55 dBm ≤ Setting Level < −30 dBm); ±1.1 dB (−65 dBm ≤ Setting Level < −55 dBm)

Level Accuracy (160 MHz BW, 2.4–2.5 GHz)

±0.7 dB (−30 dBm ≤ Setting Level ≤ +25 dBm); ±1.0 dB (−50 dBm ≤ Setting Level < −30 dBm)

Level Accuracy (160 MHz BW, 5.0–6.0 GHz)

±0.7 dB (−30 dBm ≤ Setting Level ≤ +25 dBm); ±1.0 dB (−50 dBm ≤ Setting Level < −30 dBm)

Linearity (300 kHz BW)

±0.2 dB (−55 dBm ≤ Input Level); ±0.4 dB (−65 dBm ≤ Input Level < −55 dBm)

Linearity (160 MHz BW)

±0.4 dB (−40 dBm ≤ Input Level)

Transmitter

Output Frequency Range

2.4 GHz to 2.5 GHz, 5.0 GHz to 6.0 GHz (with MT8862A-001 installed)

Setting Resolution

1 Hz

Accuracy

Depends on reference oscillator accuracy

Level Setting Range

−120 to 0 dBm

Level Setting Resolution

0.1 dB

Level Accuracy (CW, ≥−110 dBm, 20–30°C)

±1.0 dB, ±0.7 dB (typ.) (2.4–2.5 GHz); ±1.3 dB, ±1.0 dB (typ.) (5.0–6.0 GHz)

Signal Purity (Harmonic)

≤−25 dBc

Reference Oscillator

At Start

±5 × 10−7 (2 min after power-on); ±5 × 10−8 (5 min after power-on)

Aging Rate

±1 × 10−7/year

Temperature Characteristics

±2 × 10−8 (5°C to 45°C)

Shipped Frequency Accuracy

±2.2 × 10−8 (1 hour after power-on at 20°C to 30°C)

Front Panel Connectors

Main1, 2 Connector

N-J, 50Ω (nominal)

Main1, 2 VSWR

≤1.5 (2.4–2.5 GHz); ≤1.7 (5.0–6.0 GHz)

Aux Out Connector

N-J, 50Ω (nominal)

Aux Out VSWR

≤1.5 (2.4–2.5 GHz); ≤1.6 (5.0–6.0 GHz)

Back Panel Connectors

External Reference Input

BNC-J; 10 MHz; 50Ω; Operation range ±1 ppm; Input Level −15 to +20 dBm (AC coupled)

Reference Signal Output

BNC-J; 10 MHz; 50Ω; Output Level ≥0 dBm (AC coupled)

Trigger Input 1/2

BNC 1/2; Input Level TTL

Trigger Output 1/2

BNC 1/2; Output Level TTL

Ethernet (Remote)

RJ-45; 1000BASE-T

USB

USB-A, 2 Ports; USB 2.0

Expansion I/O

50 pin (DX10A-50S)

Ethernet (IP Data)

RJ-45; 1000BASE-T

General

Dimensions

426 (W) × 177 (H) × 390 (D) mm (excluding projections)

Mass

≤14 kg

Rated Voltage

100 V(ac) to 120 V(ac) or 200 V(ac) to 240 V(ac)

Rated Frequency

50 Hz/60 Hz

Power Consumption

≤350 VA

Operating Temperature

+5°C to +45°C

Storage Temperature

−20°C to +60°C

EMC

EN61326-1, EN61000-3-2

LVD

EN61010-1

RoHS

EN50581

MX886200A WLAN Measurement Software

Frequency Range

2.4 GHz Band: 2412 MHz to 2484 MHz; 5 GHz Band: 5180 MHz to 5825 MHz

Amplitude Input Level Range

−50 to +25 dBm

Amplitude Input Level Accuracy

±0.7 dB (−30 dBm ≤ Input Level ≤ +25 dBm); ±1.0 dB (−50 dBm ≤ Input Level < −30 dBm) \[20°C to 30°C, after calibration\]

Amplitude Linearity

±0.4 dB (−40 dBm ≤ Input Level, 0 to −30 dB range)

Bandwidth

40 MHz/20 MHz (802.11n); 20 MHz (802.11a/b/g); 80/40/20 MHz (802.11ac, with MX886200A-001)

Spectrum Input Level Range

−10 to +25 dBm

EVM Measurement Range

−20 to +25 dBm

Residual EVM (DSSS)

<−28 dB

Residual EVM (OFDM 802.11a/g/n)

<−40 dB

Residual EVM (OFDM 802.11ac, with MX886200A-001)

<−38 dB

Residual EVM (OFDM 802.11ax, with MX886200A-002)

<−42 dB (nom.)

**Important:** The MX886200A WLAN Measurement Software is required for measurement operation and requires the MT8862A-001 RF Frequency hardware option. Specific test capability requires the corresponding software options: 802.11ac measurement requires MX886200A-001, 802.11ax measurement requires MX886200A-002, 2×2 MIMO receiver sensitivity testing requires MX886200A-010 (supports IEEE 802.11n/ac only), and secure connections (WEP/WPA-Personal/WPA2-Personal) require MX886200A-020. Confirm the installed option string against your application requirement before deployment.**Important:** MT8862A-001 (RF Frequency 2.4 GHz, 5 GHz) is the basic hardware configuration required to enable the receiver and transmitter frequency ranges.**Important:** MX886200A WLAN Measurement Software is the basic software configuration and requires MT8862A-001.**Important:** 802.11ac connection and 802.11ac Tx/Rx measurement require the MX886200A-001 option.**Important:** 802.11ax connection and 802.11ax Tx/Rx measurement require the MX886200A-002 option.**Important:** 2x2 MIMO receiver sensitivity measurement requires the MX886200A-010 option and supports IEEE802.11n/ac only.**Important:** Secure WLAN connections (WEP, WPA-Personal, WPA2-Personal) require the MX886200A-020 option.**Important:** Adjacent channel rejection and nonadjacent channel rejection measurements require an external signal generator, which is sold separately.**Important:** IP Data Transfer using Connection Verification Test does not support MIMO and does not support 802.11ax.**Important:** USB connector on the rear panel is provided for feature expansion and is currently not supported.Recommended pairing: 2×2 MIMO receiver sensitivity and transmit power testing under IEEE 802.11n/ac requires two MT8862A units operating as Master and Slave, synchronized via the rear-panel Expansion I/O connector and Anritsu J1777A Expansion IO Cable. A switching hub is used to provide Ethernet connectivity to both units from a single PC controller.

## About this used unit

-   Warranty included
-   Functional verification included
-   Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
-   Note that unnecessary accessories may not be included (contact Test Architect to confirm).

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 0.0 USD
- **Vendor:** Anritsu
- **Type:** Test Set
- **Tags:** Anritsu, Bluetooth Tester, Manufacturers, Other Equipment, product_manual_group_2, Product_used

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 0.00 USD | In stock |

## Images

- Anritsu MT8862A Wireless Connectivity Test Set (Pre-Owned)

---

> Source: [ValueTronics](https://valuetronics.com/products/mt8862a-anritsu-bluetooth-tester-used)
> Updated: 2026-05-30