# RIGOL DS4024 200 MHz 4-Channel Digital Oscilloscope (Pre-Owned) # RIGOL DS4024 200 MHz 4-Channel Digital Oscilloscope (Pre-Owned) ## Key Features At A Glance - Available as DS4000 digital-storage or MSO4000 mixed-signal models; MSO variants add 16 digital channels - Analog bandwidth from 100 MHz to 500 MHz across the series; 200 MHz and 350 MHz models support bandwidth updates - Real-time sample rate up to 4 GSa/s on analog channels (interleaved) and 1 GSa/s per digital channel (MSO) - Standard memory depth up to 140 Mpts on analog channels and 28 Mpts per digital channel (MSO) - Waveform capture rate up to 110,000 wfms/s; hardware record/playback standard up to 200,000 frames - Innovative UltraVision technology with 9-inch WVGA (800x480) and 256-level intensity grading display - USB Host & Device, LAN (LXI-C), VGA, and Aux I/O standard; USB-GPIB interface available as an option - Parallel bus decode standard; RS232/UART, I2C, SPI, CAN and FlexRay decoding available as options The RIGOL MSO/DS4000 Series is a family of digital oscilloscopes positioned as a mainstream platform built on innovative UltraVision technology. The DS4000 models are digital storage oscilloscopes with 2 or 4 analog channels, while the MSO4000 models add 16 digital channels in a 2+16 or 4+16 configuration, targeting the embedded design and test market with high-performance specifications, powerful trigger functions, and broad analysis capabilities. An oscilloscope in this category captures voltage waveforms over time and renders them on screen so an engineer can see a signal's amplitude, frequency, timing, and shape. The MSO/DS4000 Series is aimed at the embedded design and test market, where the MSO models combine analog and digital channels for mixed-signal analysis with time-correlated display of both analog and digital waveforms. ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, so the instruments we list are on hand and ready to ship. Every pre-owned unit is inspected and functionally verified in-house before it leaves our facility, while new units ship factory-sealed exactly as received from the manufacturer. ## Compare Other Models in This Series The MSO/DS4000 Series comprises eight digital storage oscilloscope models (DS4000) and eight mixed-signal models (MSO4000) that share a common platform and differ primarily in analog bandwidth and analog channel count. The DS4000 models offer 2 or 4 analog channels, and the MSO4000 models add 16 digital channels to the same analog front end, extending the platform into mixed-signal embedded work. Across the family the core acquisition system is consistent: a 4 GSa/s interleaved analog sample rate, 140 Mpts standard memory depth, UltraVision technology, and a 9-inch 256-level grading display. The principal selection variables are therefore bandwidth tier (100, 200, 350, or 500 MHz), analog channel count, and whether the 16 digital channels of the MSO variants are required. Each model below links to its own dedicated product page with condition-matched pricing for the pre-owned configuration you select. Choose the bandwidth, channel count, and DS-or-MSO variant that fits your application, then review that specific model's specifications and pricing on its page. The models differ along three axes the series defines: analog bandwidth (100 MHz, 200 MHz, 350 MHz, or 500 MHz), analog channel count (2 or 4), and the presence of 16 digital channels on the MSO variants. Calculated rise time and minimum time-base scale track the bandwidth tier; for example, the 500 MHz models specify a 700 ps calculated rise time and a 1 ns/div minimum time base, while lower-bandwidth models specify proportionally longer rise times. The 200 MHz and 350 MHz models can be upgraded in the field through bandwidth update options. Refer to the comparison table for the exact bandwidth, channel count, sample rate, and memory depth of each model. The digital-channel sample rate, memory depth, and capture-rate figures apply only to the MSO models, which carry 16 digital channels alongside their analog inputs. Model Bandwidth Analog Ch Digital Ch **DS4024** 200 MHz 4 — DS4012 100 MHz 2 — DS4014 100 MHz 4 — DS4022 200 MHz 2 — Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Power Cord conforming to the standard of the country - Front Panel Cover (FPC-DS4000) - USB Data Cable (CB-USBA-USBB-FF-150) - 4 Passive Probes (500 MHz, RP3500A) - Quick Guide (Hard Copy) - Resource CD (User's Guide and Application Software) ## Product Core & Specifications Specification Value Vertical (Analog Channel) Bandwidth (-3 dB) (50 Ω) DC to 200 MHz Single Bandwidth (50 Ω) DC to 200 MHz Bandwidth Limit 20 MHz/100 MHz Calculated Rise Time (typical) 1.8 ns Channels Number of Analog Channels 4 Horizontal Time Base Scale 2 ns/div to 1 ks/div Standard Probes Passive Probe 4 sets RP3500A 500 MHz BW Passive Probe > **Important:** All specifications are guaranteed except parameters marked Typical; the oscilloscope must operate for more than 30 minutes under the specified operating temperature. > **Important:** The recommended calibration interval is one year. > **Important:** Three-year warranty, excluding probes and accessories. > **Important:** Bandwidth update (upgrade) is supported for the 200 MHz and 350 MHz bandwidth models. > Recommended pairing: the optional RIGOL RP7150 active differential probe (DC to 1.5 GHz), listed as compatible with the MSO/DS4000 Series. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 262.5 USD - **Vendor:** RIGOL - **Type:** Dig Oscilloscope - **Tags:** Dig Oscilloscope, Digital, DS4024, Inc., Manufacturers, Model 4024, Oscilloscopes, Pre-Owned, product_manual_group_2, Product_used, Rigol, RIGOL Technologies ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 187.50 USD | In stock | | NIST Traceable with Full Data | 225.00 USD | In stock | | ISO IEC 17025 Accredited | 262.50 USD | In stock | ## Images - RIGOL DS4024 200 MHz 4-Channel Digital Oscilloscope (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/ds4024-rigol-digital-oscilloscope-used) > Updated: 2026-06-03