# RIGOL DS6102 1 GHz 2-Channel Digital Oscilloscope (Pre-Owned)

# RIGOL DS6102 1 GHz 2-Channel Digital Oscilloscope (Pre-Owned)

## Key Features At A Glance

-   Bandwidth spans 600 MHz to 1 GHz across the series, available in 2- or 4-channel configurations
-   Real-time sample rate up to 5 GSa/s (single-channel); 2.5 GSa/s in dual-channel mode
-   Standard 140 Mpts memory depth for capturing long, detailed acquisitions
-   UltraVision technology delivers up to 180,000 waveforms/s capture rate (dots display)
-   Real-time waveform record, replay and analysis up to 200,000 frames (standard)
-   Standard serial bus trigger (RS232, I2C, SPI, CAN); optional serial bus decoding with listing display
-   USB, LAN (LXI-C), VGA, and Aux I/O standard; GPIB available as an option
-   10.1-inch WVGA (800x480) TFT display with multi-level intensity grading

The RIGOL DS6000 Series is a family of digital oscilloscopes built on RIGOL's UltraVision technology, engineered to deliver high performance and a broad feature set within its class. The series combines deep standard memory, a high waveform capture rate, powerful trigger functions, and broad analysis capabilities in a single bench instrument, and RIGOL aims it at the requirements of the largest segment of the digital oscilloscope market.

RIGOL positions the DS6000 Series across a wide range of industries, including communications, semiconductor, computing, aerospace and defense, instrumentation, research and education, industrial electronics, consumer electronics, and automotive electronics. At its core, a digital oscilloscope captures voltage waveforms over time and displays them on screen, letting an engineer see a signal's amplitude, frequency, timing, and shape during design and debug work.

ValueTronics stocks and holds its own test-and-measurement inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit moves through a process matched to its condition: pre-owned instruments are inspected and functionally verified in-house before they ship, while new units ship factory-sealed exactly as received from the manufacturer. Holding inventory directly lets the team confirm availability and condition before an order is placed.

## Compare Other Models in This Series

The DS6000 Series comprises four digital oscilloscope models that differ by bandwidth and channel count: the DS6104 (1 GHz, 4-channel), DS6102 (1 GHz, dual-channel), DS6064 (600 MHz, 4-channel), and DS6062 (600 MHz, dual-channel). All four share the same UltraVision architecture, 140 Mpts standard memory, up to 5 GSa/s single-channel sample rate, and the same display and connectivity feature set.

Because the core acquisition platform is common across the family, the practical selection decision centers on the bandwidth tier and the number of analog channels required for the application, rather than on differing standard features.

Each model below is its own dedicated product page with pre-owned-condition-matched pricing. Select the model that matches your required bandwidth and channel count, then choose the page that reflects the condition you need.

The DS6104 is the 1 GHz, four-channel configuration of the series and is the reference model RIGOL cites for the standard-configuration weight specification.

The two bandwidth tiers are designated DS606X (DC to 600 MHz) and DS610X (DC to 1 GHz), and this difference also sets the single-shot bandwidth, the calculated rise time (600 ps for the 600 MHz models versus 400 ps for the 1 GHz models), and the fastest timebase scale (1 ns/div for DS606X versus 500 ps/div for DS610X). Channel count is indicated by the model suffix: DS6XX4 models provide four channels and DS6XX2 models provide two.

The real-time sample rate also depends on channel usage, reaching 5 GSa/s on a single channel and 2.5 GSa/s with two channels active, which corresponds to 200 ps and 400 ps sample intervals respectively. Refer to the comparison table that follows for the per-model bandwidth, channel count, and timebase figures.

Model

Bandwidth

Channels

Max Sample Rate

**DS6102**

1 GHz

2

5 GSa/s

DS6104

1 GHz

4

5 GSa/s

DS6064

600 MHz

4

5 GSa/s

DS6062

600 MHz

2

5 GSa/s

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

## Accessories Supplied

-   Power Cord conforming to the standard of the country
-   Front Panel Cover
-   USB Data Cable
-   1.5GHz BW Passive Probe (1 set)
-   Quick Guide
-   Resource CD (User's Guide and Application Software)

## Product Core & Specifications

Specification

Value

Sample

Sample Mode

Real-time Sample, Equivalent Sample

Real Time Sample Rate

5 GSa/s (single-channel), 2.5 GSa/s (dual-channel)

Equivalent Sample Rate

100 GSa/s

Peak Detect

200 ps (single-channel), 400 ps (dual-channel)

Averaging

After all the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192.

High Resolution

12 bits of resolution when ≥5 µs/div @ 5 GSa/s (or ≥10 µs/div @ 2.5 GSa/s).

Memory Depth

single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 140M pts available; dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 70M pts available

Number of Channels

two channels

Input

Input Coupling

DC, AC or GND

Input Impedance

(1 MΩ±1%) || (14 pF±3 pF) or 50 Ω±1.5%

Probe Attenuation Coefficient

0.01X-1000X, 1-2-5 step

Maximum Input Voltage (1MΩ)

CAT I 300 Vrms, CAT II 100 Vrms, Transient Overvoltage 1000V pk; with RP2200/RP3300/RP3500/RP5600 10:1 probe: CAT II 300 Vrms

Horizontal

Timebase Scale

500 ps/div to 1000 s/div

Time Base Accuracy

≤ ± 4 ppm

Time Base Drift

≤ ± 2 ppm/Year

Delay Range

Pre-trigger (negative delay): ≥1 screen width; Post-trigger (positive delay): 1 s to 100,000 s

Timebase Mode

Y-T, X-Y, Roll, Time Delayed

Waveform Capture Rate

150,000 wfms (vector display); 180,000 wfms (dots display)

Vertical

Bandwidth (-3dB)

DC to 1 GHz

Single-shot Bandwidth

DC to 1 GHz (each channel)

Vertical Resolution

8 bits, two channels sample at the same time

Vertical Scale

2 mV/div to 5 V/div (1 MΩ); 2 mV/div to 1 V/div (50 Ω)

Offset Range

2 mV/div to 124 mV/div: ± 1.2V (50 Ω); 126 mV/div to 1 V/div: ± 12V (50 Ω); 2 mV/div to 225 mV/div: ± 2V (1MΩ); 230 mV/div to 5 V/div: ± 40V (1MΩ)

Bandwidth Limit

20 MHz or 250 MHz

Low Frequency Response (AC Coupling -3dB)

≤5 Hz (on BNC)

Calculated Rise Time

400 ps

DC Gain Accuracy

±2% full scale

DC Offset Accuracy

200 mV/div to 5 V/div: 0.1 div ± 2 mV ± 0.5% offset value; 2 mV/div to 195 mV/div: 0.1 div ± 2 mV ± 1.5% offset value

ESD Tolerance

±2 kV

Channel to Channel Isolation

DC to maximum bandwidth: >40 dB

Trigger

Trigger Level Range

Internal: ± 6 div from center screen; EXT: ± 0.8 V

Trigger mode

Auto, Normal, Single

Holdoff Range

100 ns to 10 s

High Frequency Rejection

50 kHz

Low Frequency Rejection

5 kHz

Edge Trigger - Edge Type

Rising, Falling, Rising&Falling

Pulse Trigger - Pulse Condition

Positive Pulse Width (greater than, lower than, within specific interval); Negative Pulse Width (greater than, lower than, within specific interval)

Pulse Width Range

4 ns to 4 s

Slope Trigger - Slope Condition

Positive Slope (greater than, lower than, within specific interval); Negative Slope (greater than, lower than, within specific interval)

Slope Time Setting

10 ns to 1 s

Math

Waveform Operation

A+B, A-B, A×B, A/B, FFT, Editable Advanced Operation, Logic Operation

FFT Window Function

Rectangle, Hanning, Blackman, Hamming

FFT Display

Split, Full Screen

FFT Vertical Scale

dB, Vrms

Logic Operation

AND, OR, NOT, XOR

Math Function

Intg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent

Number of Buses for Decoding

2

Decoding Type

Parallel (standard), RS232/UART (option), I2C/SPI (option), CAN (option), FlexRay (option)

Display

Display Type

10.1 inches (257 mm) TFT LCD display

Display Resolution

800 Horizontal ×RGB× 480 Vertical Pixel

Display Color

160,000 Color

Persistence Time

Minimum, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite

Display Mode

Dots, Vectors

Real-time Clock

Time and Date (user adjustable)

Measure

Number of Measurements

Display 5 measurements at the same time

Measurement Statistic

Average, Max, Min, Standard Deviation, Number of Measurements

Frequency Counter

Hardware 6 bits frequency counter (channels are selectable)

I/O

Standard Ports

USB DEVICE, two USB HOST ports, LAN, VGA Output, 10 MHz Input/Output, Aux output (TrigOut, Fast, GND, PassFail, Calibration)

Printer Compatibility

PictBridge

General Specifications

Probe Compensation Output Voltage

About 3 V, peak-peak

Probe Compensation Frequency

1 kHz

Power Voltage

100-120 V/50Hz/60Hz/400Hz; 100-240 V/50 Hz/60Hz

> **Important:** Maximum input voltage of the analog channel: CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 V peak.

> **Important:** All specifications are guaranteed except the parameters marked with "Typical", and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature.

> **Important:** Serial bus trigger functions (RS232, I2C, SPI, CAN, etc.) are standard; serial bus decoding is an optional function (RS232/UART, I2C/SPI, CAN, FlexRay decoding kits ordered separately).

> **Important:** GPIB connectivity is optional (USB to GPIB Module, order number USB-GPIB).

> **Important:** The 11.1 V, 147 Wh Lithium Battery Set option is available in China only.

> **Important:** Three-year warranty, excluding probes and accessories.

> Recommended pairing: the RIGOL RP6150A 1.5 GHz low-Z passive probe and the RP7150 1.5 GHz active differential probe are both listed as compatible with the DS6000 series.

## About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

-   Warranty included
-   Functional verification included
-   Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
-   Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 0.0 USD - 262.5 USD
- **Vendor:** RIGOL
- **Type:** Dig Oscilloscope
- **Tags:** Dig Oscilloscope, Digital, DS6102, Inc., Manufacturers, Model 6102, Oscilloscopes, Pre-Owned, product_manual_group_2, Product_used, Rigol, RIGOL Technologies

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| None | 0.00 USD | In stock |
| NIST Traceable | 187.50 USD | In stock |
| NIST Traceable with Full Data | 225.00 USD | In stock |
| ISO IEC 17025 Accredited | 262.50 USD | In stock |

## Images

- DS6102 Rigol Digital Oscilloscope

---

> Source: [ValueTronics](https://valuetronics.com/products/ds6102-rigol-digital-oscilloscope-used)
> Updated: 2026-06-03