# 710 Fluke Calibrator New

**Features**

-   Key valve testing functions - valve signature test, speed test, step test, manual test, bump/partial stroke test
-   Key mA loop calibrator functions - mA source, mA simulate, mA read, mA read/loop power, and volts read
-   ValveTrack™ software - enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory
-   Valve test procedures that deliver Good, Marginal or Bad assessment of a control valve
-   Generic HART communication
-   Best-in-class mA accuracy at 0.01% measurement or source value
-   Compact rugged design
-   Intuitive user interface with Quick-Set knob for fast setup, easy to use
-   24 V DC loop power with mA measure mode (-25 to 125%)
-   Resolution of 1 μA on mA ranges and 1 mV on voltages ranges
-   Built in selectable 250 Ω resistor for HART communications
-   Simple two wire connection for all measurements
-   Auto shutdown to conserve battery life
-   Variable step and ramp time in seconds

**Accessories (Included)**

-   mA Loop Valve Tester
-   Stackable Test Lead Set
-   Extended Tooth Alligator Clip Set
-   Test Probes
-   SureGrip™ Hook Clips
-   Lemo to USB Upload/Download Cable
-   ValveTrack™ Software
-   6 x AAA Batteries (Installed)
-   Softcase
-   Product Manual CD-ROM
-   Quick Reference Guide
-   Safety Information

**Application**

-   Oil and gas
-   Food and beverage
-   Waste/wastewater
-   Pharmaceuticals
-   Process automation

**Specifications**

-   Functions: mA source, mA simulate, mA read, mA read/loop power, and volts read
-   Ranges: mA (0 to 24 mA) and Volts (0 to 30 V dc)
-   Resolution: 1uA on mA ranges and 1mV on voltage range
-   Accuracy: 0.01% ±2 counts all ranges (@ 73.4°F ±41°F \[23°C ±5°C\])
-   Operating Temperature Range: 14 to 131°F (-10 to 55°C)
-   Humidity Range: 10 to 95% non-condensing
-   Stability: 20 ppm of F.S./°C from -10 to 18°C and 28 to 55°C
-   Display: 128 x 64 pixels, LCD graphic w/backlight, .34 in high digits
-   Power: 6 x AAA alkaline
-   Battery Life: ≥40 hours continuous use (measure mode using alkaline)
-   Loop Compliance Voltage: 24 V dc @ 20 mA
-   Voltage Protection: 240 V ac
-   Overload Current Protection: 28 mA dc
-   EMC: EN61326 Annex A (portable instruments)
-   Dimensions: 6 x 3.6 x 1.3" (15 x 9 x 3 cm)
-   Weight: 0.3 kg (9.5 oz)
-   Warranty: Three year

The 710 is a valve tester from Fluke. Designed to enable users to perform quick, easy tests on HART smart control valves. Features built-in test procedures and an intuitive user interface that allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics helps you make maintenance decisions faster than ever.

## Details

- **Price:** 3238.99 USD
- **Vendor:** Fluke
- **Type:** Calibrator Oth
- **Tags:** Calibrator, Fluke, Manufacturers, Other, Other Equipment, product_manual_group_2, Product_new

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 3238.99 USD | In stock |

## Images

- 710 Fluke Calibrator

---

> Source: [ValueTronics](https://valuetronics.com/products/710-fluke-calibrator-new)
> Updated: 2026-05-21