# RIGOL DS1102E 100 MHz Digital Oscilloscope

# RIGOL DS1102E 100 MHz Digital Oscilloscope

## Key Features At A Glance

-   Bandwidth from 50 MHz to 100 MHz across the series (DS1052 and DS1102 models)
-   Up to 1 GSa/s real-time sample rate with Sin(x)/x waveform interpolation
-   Optional 16-channel logic analyzer for mixed-signal measurement on DS1000D models
-   Two analog channels plus one external trigger channel across the series
-   5.6-inch 64k-color TFT LCD with adjustable analog waveform intensity
-   USB Device, USB Host and RS-232 standard for storage, PictBridge printing and remote control
-   Edge, Pulse Width, Video, Slope and Alternate triggers (Pattern and Duration on DS1000D) with adjustable sensitivity
-   Waveform record/replay up to 1000 frames, plus FFT, Pass/Fail testing and UltraScope PC software

The RIGOL DS1000E and DS1000D series are economical digital oscilloscopes built for high performance on the bench. The DS1000E models (DS1102E and DS1052E) are designed with two analog channels and one external trigger channel. The DS1000D models (DS1102D and DS1052D) carry the same two analog channels and external trigger channel and add a 16-channel logic analyzer, making them mixed-signal oscilloscopes that combine analog and digital acquisition in a single instrument.

A digital oscilloscope captures electrical signals as waveforms — voltage plotted against time — so an engineer can see a signal's amplitude, timing, and shape directly. Across this series, RIGOL lists the instruments for electronic circuit test, circuit functional test, verification of the logical relation between signals, mixed-signal circuit test, and education and training. The 16-channel logic analyzer on the DS1000D models supports the mixed-signal and logic-relation work in that list by acquiring digital lines alongside the two analog channels.

ValueTronics keeps its inventory on hand in our own 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, where we have specialized in test and measurement equipment since 1992. Holding and stocking our own inventory lets us match the right instrument and condition to your application and ship it quickly.

## Compare Other Models in This Series

The DS1000E and DS1000D series are economical, high-performance digital oscilloscopes that share a common platform across four models. The DS1000E models are configured with two analog channels and one external trigger channel; the DS1000D models add a 16-channel logic analyzer to those same two analog channels and external trigger channel, making them mixed-signal oscilloscopes.

Within each configuration, the series is offered at two analog-bandwidth levels, so a buyer chooses both the configuration — analog-only DS1000E or mixed-signal DS1000D — and the bandwidth that fits the application.

Each new model below has its own dedicated product page with condition-matched pricing. Select the model and configuration that fit your application, then choose the new listing that matches your budget and condition requirements.

The four models differ along two axes. Bandwidth separates the DS1102E and DS1102D (100 MHz) from the DS1052E and DS1052D (50 MHz); the 100 MHz models reach a 25 GSa/s equivalent sample rate and a 2 ns/div fastest scanning speed, versus 10 GSa/s and 5 ns/div on the 50 MHz models. Typical rise time is under 3.5 ns at 100 MHz and under 7 ns at 50 MHz.

Configuration separates the DS1000D models, which include the 16-channel logic analyzer along with Pattern and Duration trigger types, from the DS1000E models, which provide the two analog channels and external trigger without the logic analyzer. The comparison table below summarizes these per-model differences.

Model

Bandwidth

Analog Channels

Digital Channels

**DS1102E**

100MHz

2

0

DS1052E

50MHz

2

0

DS1102D

100MHz

2

16

DS1052D

50MHz

2

16

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

## Accessories Supplied

-   Passive Probes × 2 (1.5m), 1:1 or 10:1 adjustable
-   A Power Cord that fits the standard of destination country
-   A Quick Guide

## Product Core & Specifications

Specification

Value

Acquisition

Real-Time Sample Rate

1GSa/s\[1\], 500MSa/s

Equivalent Sample Rate

25GSa/s

Averages

N selectable from 2, 4, 8, 16, 32, 64, 128 and 256

Inputs

Input Coupling

DC, AC, GND

Input Impedance

1MΩ±2%, the input capacity is 18pF±3pF

Probe Attenuation Factors

1X, 5X, 10X, 50X, 100X, 500X, 1000X

Maximum Input Voltage

400V (DC+AC Peak, 1MΩ input impedance)

Time Delay between Channels (typical)

500ps

Horizontal

Sample Rate Range

Real-Time: 13.65Sa/s-1GSa/s; Equivalent: 13.65Sa/s-25GSa/s

Waveform Interpolation

Sin(x)/x

Memory Depth (Single channel, 1GSa/s)

16kpts (normal)

Memory Depth (Single channel, 500MSa/s or lower)

16kpts (normal), 1Mpts (long memory)

Memory Depth (Dual channel, 500MSa/s or lower)

8kpts (normal)

Memory Depth (Dual channel, 250MSa/s or lower)

8kpts (normal), 512kpts (long memory)

Scanning Speed Range (Sec/div)

2ns/div~50s/div, 1-2-5 Sequence

Sample Rate and Delay Time Accuracy

±50ppm (any interval ≥1ms)

Vertical

A/D Converter

8-bit resolution, all channels sample simultaneously

Volts/div Range

2mV/div~10V/div (at the input terminal connecting to BNC)

Maximum Input

CAT I 300Vrms, 1000Vpk, instantaneous overvoltage 1000Vpk; CAT II 100Vrms, 1000Vpk; RP2200 10:1: CAT II 300Vrms; RP3300A 10:1: CAT II 300Vrms

Offset Range

±40V (250mV/div~10V/div); ±2V (2mV/div~245mV/div)

Analog Bandwidth

100MHz

Single-shot Bandwidth

100MHz

Selectable Analog Bandwidth Limit (typical)

20MHz

Lower Frequency Response (AC, –3dB)

≤5Hz (at input BNC)

Rise Time (typical at BNC, equivalent sample)

< 3.5ns

DC Gain Accuracy

2mV/div-5mV/div: ±4% (In Normal or Average acquisition mode); 10mV/div-10V/div: ±3% (In Normal or Average acquisition mode)

DC Measurement Accuracy (Average Acquisition Mode)

When vertical position is zero and N≥16: ±(DC Gain Accuracy×reading + 0.1div + 1mV); When vertical position is not zero and N≥16: ±\[DC Gain Accuracy×(reading + vertical position) + (1% of vertical position) + 0.2div\]; When vertical scale is between 2mV/div and 245mV/div, add 2mV more for setting value; When vertical scale is between 250mV/div and 10V/div, add 50mV more for setting value

Delta Volts Measurement Accuracy (Average Acquisition Mode)

Under same setting and condition, the voltage difference (ΔV) between any two points in the waveforms coming from the average of more than 16 waves have been acquired: ±(DC Gain Accuracy×reading + 0.05div)

Trigger

Trigger Sensitivity

0.1div~1.0div (adjustable)

Trigger Level Range

Internal: ±6div from center of screen; EXT: ±1.2V

Trigger Level Accuracy (typical, rising and falling time ≥20ns)

Internal: ±(0.3div×V/div) (±4 divisions from center of screen); EXT: ±(6% of setting + 200mV)

Trigger Offset

In Normal mode: pre-trigger (memory depth/2\*Sample rate), delayed trigger 1s; In Slow Scan mode: pre-trigger 6div, delayed trigger 6div

Trigger Holdoff Range

500ns~1.5s

Set Level to 50% (typical)

When input signal frequency ≥50Hz

Edge Trigger Slope

Rising, Falling, Rising+Falling

Pulse Width Trigger

(>, <, =) Positive pulse width, (>, <, =) Negative pulse width; Pulse Width Range 20ns~10s

Video Trigger

Support for standard NTSC, PAL and SECAM broadcast systems. Line number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)

Slope Trigger

(>, <, =) Positive slope, (>, <, =) Negative slope; Time Setting 20ns~10s

Alternate Trigger

Trigger on CH1: Edge, Pulse Width, Video, Slope; Trigger on CH2: Edge, Pulse Width, Video, Slope

Measurements

Cursor

Manual: voltage difference between cursors (ΔV), time difference between cursors (ΔT), reciprocal of ΔT in Hertz (1/ΔT); Track: voltage value and time value of waveform point; Auto: cursors are visible for Automatic Measurement

Auto Measure

Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1→2, Delay1→2

Display

Display Type

145mm (5.6 inch) diagonal TFT Liquid Crystal Display

Display Resolution

320 horizontal × RGB × 234 vertical pixels

Display Color

64k color

Display Contrast (typical)

150:1

Backlight Brightness (typical)

300 nit

Probe Compensator Output

Output Voltage (typical)

Approximately 3Vpp (peak to peak value)

Frequency (typical)

1kHz

Power Supply

Supply Voltage

100~240VACRMS, 45~440Hz, CAT II

Power Consumption

Less than 50W

Fuse

2A, T level, 250V

Environmental

Ambient Temperature

Operating 10℃~40℃; Non-operating -20℃~+60℃

Cooling Method

fan cooling

Humidity

below +35℃: ≤90% relative humidity; +35℃~+40℃: ≤60% relative humidity

Altitude

Operating at 3,000 m or below; Non-operating at 15,000 m or below

Mechanical

Dimensions

Width 303mm, Height 154mm, Depth 133mm

Weight

Without package 2.3kg; Packaged 3.5kg

IP Protection

IP2X

Calibration Interval

The recommended calibration interval is one year

> **Important:** At a 1 GSa/s real-time sample rate, only one channel is available.

> **Important:** Pattern Trigger and Duration Trigger are available on the DS1000D series only.

> **Important:** To meet the published specifications the instrument must be operated continuously for 30 minutes under the specified operating temperature, and a Self-Calibration must be performed through the Utility menu if the operating temperature varies by 5°C or more. All specifications are guaranteed unless marked "typical".

> Recommended pairing: add the optional USB-GPIB Adapter from the ordering information to integrate the oscilloscope into GPIB-based automated test systems.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 449.0 USD
- **Vendor:** RIGOL
- **Type:** Dig Oscilloscope
- **Tags:** Dig Oscilloscope, Digital, DS1102, DS1102E, Factory New, Inc., Manufacturers, Model 1102, Oscilloscopes, product_manual_group_1, Product_new, Rigol, RIGOL Technologies

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 449.00 USD | In stock |

## Images

- DS1102E Rigol Digital Oscilloscope

---

> Source: [ValueTronics](https://valuetronics.com/products/ds1102e-rigol-digital-oscilloscope-new)
> Updated: 2026-06-03