# ZUP36-24 Lambda DC Power Supply Used

**Additional Features:**

-   Constant Voltage/Constant Current
-   Built-in RS-232 & RS-485 Interface
-   An embedded Microprocessor controller
-   Digital Encoder Knob
-   Software Calibration
-   Last Setting Memory
-   Parallel Operation (Master/Slave) Active Current Sharing
-   External Voltage or Resistance Programming
-   Active Power Factor Correction: 99%
-   85~265Vac Universal Input Voltage
-   19" Rack Mounted ATE and OEM
-   Worldwide Safety Agency Approvals
-   CE Mark for LVD and EMC Regulation

**Applications**

-   Industrial
-   Test

**Specifications:**

-   Output Voltage Range: 0-36 V
-   Output Current Range: 0-24 A
-   Maximum Power: 864 W
-   Ripple 5 Hz-1 MHz: 5 mV
-   Noise 20 MHz BW: 70 mV
-   Ripple 5 Hz-1 MHz: 30 mA
-   Efficiency (100/200 VAC): 80/84 %
-   Load Regulation: 2mV + 0.005% over 0 - 100% load change
-   Line Regulation: 1mV + 0.005% over 85 - 132 or 170 - 265VAC line change
-   Recovery Time: 0.2ms
-   Temperature Coefficient: 30ppm/°C following 30 minute warm up
-   Temperature Drift: 0.01% + 2mV change in output
-   Up programming response time: 50 - 60ms 
-   Down programming response time (CV): 50ms
-   Load Regulation: 0.07% + 10mA on 800W models
-   Line Regulation: 0.01% + 5mA on 800W models
-   Temperature Coefficient: 100ppm/°C from rated current after 30 minute warm up time
-   Temperature Drift: 0.05% + 10mA 800W models 
-   Prog Voltage resolution: Better than 0.028% of rated voltage
-   Prog Voltage accuracy:  .02%+20mV
-   Prog Current resolution: Better than 0.03% of rated output current
-   Prog Current accuracy: 0.4% + 40mA
-   Overvoltage Shutdown: 0-40
-   Thermal Protection: Over temperature protected
-   Display - Voltage: 3 digits
-   Display - Status: CV / CC, Alarm, Foldback, Local/Remote, On/Off
-   Remote On/Off: TTL signal or dry contact relay
-   Output Good: Open Collector
-   Voltage & Current Programming: By either Voltage (0-4V) or Resistance (0-4k)
-   Remote Sense: Up to 0.5V compensation per output cable
-   Communication Interface: RS232 & RS485 standard, IEEE488 optional
-   Series & Parallel Operation: Series: Up to two units; Parallel: Up to five units in master-slave configuration
-   AC Input Voltage range: 85-265VAC (47-63Hz)
-   Inrush Current (100/200VAC): 30A
-   Hold Up Time (Typ) at 100VAC: 20 ms
-   Power Factor Correction: Complies with EN61000-3 Class A (0.99 typ)
-   Temperature Range: Operating: 0 - 50°C; Storage: -20 to +70°C
-   Humidity (non condensing): Operating: 30 - 90% RH, Storage 10 - 95%RH
-   Cooling: Internal fan
-   Withstand Voltage: Input to Ground 2kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min
-   Isolation Resistance: >100M at 25°C & 70% RH
-   Vibration & Shock (non-op.): Vibration:10-55 Hz(1 min.) 2G constant X, Y, Z, when correctly mounted; Shock: <20G
-   Safety Agency Approvals: UL3111-1, EN61010-1, CE Mark
-   Conducted & Radiated EMI: EN55022-B conducted, A radiated, FCC Class B conducted, A radiated, VCCI-2 conducted, -1 radiated

The TDK Lambda ZUP36-24 is a 0-36 V, 0-24 A Zero up programmable DC Power Supply with an output power of 864 Watts. The ZUP36-24 is perfect for Industrial and Test applications.

## Details

- **Price:** 0.0 USD
- **Vendor:** Lambda
- **Type:** Dc Supply
- **Tags:** DC Power Supply, Lambda, Manufacturers, Power Supplies & Loads, product_manual_group_1, Product_used

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 0.00 USD | In stock |

## Images

- ZUP36-24 Lambda DC Power Supply Used

---

> Source: [ValueTronics](https://valuetronics.com/products/zup36-24-lambda-dc-power-supply-used)
> Updated: 2026-05-21