# 3605 Associated Research HiPot Used **Additional Features:** - 5KV AC Hipot Tester - Patented SmartGFI® safety circuit protects the operator from shock hazards - Patented VERI-CHEK® feature prompts users through steps to validate the instrument’s operation - Patented CAL-ALERT® feature alerts the operator that the tester is due for re-calibration - Built-in adjustable Continuity test for checking basic continuity - Graphic LCD provides intuitive menu system to simplify the entire testing process from set-up to results - PLC Remote Control allows operators to remotely control the Hipot tester - Remote Safety Interlock feature prevents the high-voltage from being activated without the interlock enabled - Memories with 3 Steps per memory for storing and recalling test parameters - Electronic Ramp and Dwell timers for more consistent and reliable testing - Interconnects with an Associated Research Ground Bond tester to form a complete test system - Digitally controlled arc detection circuit allows the operator to program sensitivity levels for detecting arcs - Minimum and maximum trip settings for safer and more accurate testing - Comes complete with an adapter box for products terminated in a line cord **Input Specifications** - Voltage: 115/230 VAC ± 10%, user selectable - Frequency: 50/60 Hz ± 5% - Fuse: 3.15 A, fast acting 250 VAC **Dielectric Withstand Test Mode** **Output Rating**  - 5000 V @ 20 mA AC; 6000 V @ 7.5 mA DC **Voltage Setting**  - Range: 0 - 5.00 KV AC; 0 - 6.00 KV DC - Resolution: 0.01 KV - Accuracy: ± (2% of setting + 5 V) **Maximum Limit** - AC Range: 0.00 - 20.00 mA - Resolution: 0.01 mA - DC Range: 0 - 7500 μA - Resolution: 1 μA - Accuracy: AC and DC ± (2% of setting + 2 counts) **Minimum Limit**  - AC Range: 0.000 - 9.999 mA - Resolution: 0.001 mA - DC Range: 0.0 - 999.9 μA - Resolution: 0.1 μA - Accuracy: AC and DC ± (2% of setting + 2 counts) **Arc Detection** - Range: 0 - 9, 0 disabled **Ground Fault Interrupt**  - GFI Trip Current: 450 μA max (AC or DC) - HV Shut Down Speed: < 1ms **Current Display Auto Range** - AC Range 1: 0.000 - 3.500 mA - Range 2: 3.00 - 20.00 mA - DC Range 1: 0.0 μA - 350.0 μA - Range 2: 0.300 mA - 3.500 mA - Range 2: 3.00 mA - 7.50 mA - Accuracy All Ranges ± (2% of reading + 2 counts) **DC Output Ripple**  - ≤5% Ripple RMS at 6 KV DC @ 7.5 mA, Resistive Load **Discharge Time** - <=200 ms The maximum capacitive load vs output voltage: - 0.20 μF < 1 KV 0.050 μF < 4 KV - 0.10 μF < 2 KV 0.040 μF < 5 KV - 0.06 μF < 3 KV 0.015 μF < 6 KV **AC Voltage Waveform** - Sine Wave, Crest Factor = 1.3 - 1.5, <2% THD **Output Frequency** - Range: 50 or 60 HZ, User Selectable **Output Voltage Regulation** - ± (1% of output + 5 V) from no load to full load and over input voltage range. **Dwell Timer**  - Range: AC 0, 0.3 - 999.9 sec (0 = Constant) - DC 0, 0.4 - 999.9 sec (0 = Constant) - Accuracy: ± (0.1% of reading + 0.05 sec) **Ramp Timer**  - Range: Ramp-Up: 0.1 - 999.9 sec - Ramp-Down: AC 0.0 - 999.9 sec - DC 1.0 - 999.9 sec (0=OFF) - Accuracy: ± (0.1% of reading + 0.05 sec) **Ground Continuity Current** - DC 0.1 A ± 0.01 A, fixed **Ground Continuity Maximum Limit, Minimum Limit** - Range: 0.0 Ω - 1.50 Ω - Resolution: 0.01 Ω - Accuracy: ± (3% of setting + 0.02 Ω) **Ground Continuity Auto Offset** - Range: 0.0 Ω - 0.50 Ω - Resolution: 0.01 Ω - Accuracy: ± (3% of setting + 0.02 Ω) **Insulation Resistance Test Mode** **Voltage Setting** - Range: 30 - 1000 VDC - Accuracy: ± (2% of setting + 5 V) **Resistance Display** - Range: 1 - 9999 MΩ (4 Digit, Auto Ranging) - Resolution: 500 VDC - 1000 VDC MΩ                MΩ 0.001      1.000 - 9.999 0.01        10.00 - 99.99 0.1          100.0 - 999.9 1              1000 - 9999 **Accuracy** - ± (2% of reading +2 counts) at test voltage; 500 - 1000 V and 1 - 999.9 MΩ - ± (5% of reading +2 counts) at test voltage; 500 - 1000 V and 1000 - 9999 MΩ - ± (8% of reading +2 counts) at test voltage; 30 - 500 V and 1 - 1000 MΩ **Maximum Limit**  - Range: 0, 1 - 9999 MΩ (0=OFF) - Accuracy: Same as Resistance Display **Minimum Limit**  - Range: 1 - 9999 MΩ - Accuracy: Same as Resistance Display **Ramp Timer**  - Range: Ramp-Up: 0.1 - 999.9 sec - Ramp-Down: 1.0 - 999.9 sec (0=OFF) - Accuracy: ± (0.1% of reading + 0.05 sec) **Delay Timer**  - Range: 0, 0.5 - 999.9 sec (0 = Constant) - Accuracy: ± (0.1% of reading + 0.05 sec) **Ground Fault Interrupt** - GFI Trip Current: 450 μA max - HV Shut Down Speed: < 1 ms **General Specifications** Remote Control & Signal Output The following input and output signals are provided through two 9 pin D type connectors: 1\. Remote control: Test, Reset, and Remote Interlock 2\. Remote recall of memory program #1, #2, and #3 3\. Outputs: Pass, Fail, Test-in-process, and Reset - Program Memory: 10 Memories, 3 steps per memory - Security: Key Lock capability to avoid unauthorized access to all test parameters and memory locations - Mechanical: Bench or rack mount with tilt up feet - Dimensions: (W x H x D) 8.46 x 3.5 x 14.57 in. (215 x 89 x 370 mm) - Calibration: Traceable to National Institute of Standards & Technology (NIST) - Calibration controlled by software - Adjustments are made through front panel keypad in a restricted access calibration mode - Calibration information stored in non-volatile memory ## Details - **Price:** 0.0 USD - **Vendor:** Associated Research - **Type:** Hipot - **Tags:** Associated Research, Hipot, Manufacturers, Other Equipment, product_manual_group_1, Product_used, Updated Item Review ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 0.00 USD | In stock | | NIST Traceable with Full Data | 0.00 USD | In stock | | ISO IEC 17025 Accredited | 0.00 USD | In stock | ## Images - 3605 Associated Research HiPot --- > Source: [ValueTronics](https://valuetronics.com/products/3605-associated-research-hipot-used) > Updated: 2026-05-21