# Yokogawa DL2700 150 MHz Multichannel Digital Oscilloscope (Pre-Owned) # Yokogawa DL2700 150 MHz Multichannel Digital Oscilloscope (Pre-Owned) ## Key Features At A Glance - 150 MHz input bandwidth with 2 to 8 full-range input channels selectable across the series - Up to 200 MS/s sampling per channel in normal mode; 500 MS/s in interleave mode with available channels halved - Record length options from 1 to 16 megawords across the twelve-model series - GP-IB and SCSI interfaces with a 3.5-inch floppy drive standard for data exchange - History Memory recalls up to 8,000 prior screens captured before a measurement stops - Box Average function for high-resolution measurement of one-shot signals - Trigger suite: gate, pattern, pulse-width, window, and TV (NTSC/PAL/HDTV) triggers - Up to 32 logic inputs via a dedicated logic probe, plus two-point simultaneous Zoom The Yokogawa DL2700 is a multichannel, long-recording digital oscilloscope built to capture and analyze waveforms across many channels over extended record lengths. It provides up to eight full-range input channels, a 150 MHz frequency bandwidth, sampling rates as high as 500 MS/s, and record lengths reaching 16 megawords, combining multichannel acquisition with deep memory in a single instrument. The DL2700 is intended for the development of electronic instruments and the analysis of abnormal phenomena, where engineers need to observe multichannel waveforms—or waveforms sampled at high rates—over prolonged periods. Its multichannel configuration, long-recording memory, and analysis functions are aimed at making troubleshooting efficient and at capturing intermittent or abnormal events for later study. ValueTronics stocks and holds its own test-and-measurement inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every used unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. ## Product Core & Specifications Specification Value Vertical / Analog Frequency bandwidth 150 MHz Maximum input channels 2, 4, 6 or 8 Maximum sensitivity 2 mV/div DC accuracy ±1.5% Channel-to-channel isolation \-40 dB Multiplexer circuitry bandwidth No less than 200 MHz Acquisition A/D converter 8-bit, 250 MS/s per channel Maximum sampling rate (normal mode) 200 MS/s Maximum sampling rate (interleave mode) 500 MS/s Maximum record length (normal mode) 8 megawords Maximum record length (interleave mode) 16 megawords Record length options 1, 4 or 16 megawords Waveform update rate Approximately 3 cycles/s (1 megaword/channel, 8-channel application) Sequential Store minimum dead time 10 µs Box Average Average of consecutive 2n data items (256 maximum); data treated as 16-bit during box averaging Memory & Functions History Memory Maximum 8,000 screens Logic inputs Maximum 32 (using a dedicated logic probe) Trigger Trigger functions Gate, pattern, pulse-width, window and TV trigger TV trigger compatibility NTSC, PAL and HDTV Comparators One per channel; channel 1 has two (for Window Trigger) Display Display 8.4" TFT color LCD Storage & Interfaces Floppy disk drive 3.5" (standard) SCSI interface Standard GP-IB interface Standard Magneto-optic disk drive Optional Built-in printer Optional Processor System Processors Intel 80960KB and Toshiba TMP68303 > **Important:** In interleave mode, the maximum 500 MS/s sampling rate is achieved with the number of available channels halved. > **Important:** A maximum of 32 logic inputs requires a dedicated logic probe. > **Important:** A magneto-optic disk drive and a built-in printer are available as options; the 3.5" floppy drive and SCSI interface are standard. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - **Vendor:** Yokogawa - **Type:** Dig Oscilloscope - **Tags:** Dig Oscilloscope, Digital, DL2700, Manufacturers, Model 2700, Oscilloscopes, Pre-Owned, product_manual_group_1, Product_used, Yokogawa, Yokogawa Electric ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 0.00 USD | In stock | ## Images - Yokogawa DL2700 150 MHz Multichannel Digital Oscilloscope (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/dl2700-yokogawa-digital-oscilloscope-used) > Updated: 2026-06-03