# SLM-4 Sorensen DC Electronic Load Used

**Additional Features:**

-   150 memory settings for DC modules
-   5 memory settings for AC modules
-   Memory settings store entire chassis condition
-   Plug-in design allows for easy replacement of different load modules as applications change
-   Flexible configuration allows any bay to accept any SLM (single module) or SLD (dual) series load module
-   Four analog programming inputs on the rear panel DB9 connector can control the four SLM load modules' load current with arbitrary waveforms
-   Built-in GPIB/RS232 interface, which uses one GPIB address to control up to four electronic load modules with set load status and read back meter capabilities
-   Designed to permit mounting in a standard 19-inch rack for system application
-   Equipped with tilt stands on its two front feet which can be flipped forward to provide an inclined viewing angle of the front panel for bench-top use
-   Dimensions (W\*H\*D): 17.3 x 7.0 x 017.5 in. (440 x 177 x 445 mm)

**AC Input**

-   Line: 110V/115V±10%; 200V/230V±10%
-   Frequency: 50/60 Hz
-   Fuse: T2A/250V (5x20mm); T1A/250V (5x20mm)
-   Max Power Consumption: 100W

**Regulatory Compliance**

-   Certified to UL 61010-1, CSA C22.2 No. 61010.1 and IEC/EN 61010-1
-   CE Compliant: Low Voltage Directive (73/23/EEC) using EN 61010-1, and EMC Directive (89/336/EEC) using EN 61326
-   FCC Compliant to 21 CFR, Subpart J.

The SLM-4 chassis has a four-bay configuration for multichannel and ATE requirements. The SLM-4 chassis is compatible with SLM and SLD loads. Each chassis contains non-volatile memory capable of storing up to 150 module setups and nine 16-step sequences for automated, standalone testing. Or for more complex test sequences, the chassis come with GPIB and RS-232 as standard interfaces.

The SLM-4 electronic load chassis is designed with open bays to easily receive up to four load modules, which slide into their respective bays from the rear of the chassis.

The SLM-4 chassis provides high performance, easy operation and a cost-effective solution for power source testing. There are five power supplies in the SLM-4 chassis, one for the system controller and one for each of the four optically isolated channels.

The SLM-4 Chassis can operate with 100, 115, 200 or 230VAC input.

## Details

- **Price:** 0.0 USD
- **Vendor:** Sorensen
- **Type:** Dc Loads
- **Tags:** DC Electronic Load, Manufacturers, Power Supplies & Loads, product_manual_group_1, Product_used, Sorensen

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 0.00 USD | In stock |

## Images

- SLM-4 Sorensen DC Electronic Load Used

---

> Source: [ValueTronics](https://valuetronics.com/products/slm-4-sorensen-dc-electronic-load-used)
> Updated: 2026-05-21