# GW Instek GPE-3323 3-Channel 217W Linear DC Power Supply

# GW Instek GPE-3323 3-Channel 217W Linear DC Power Supply

## Key Features At A Glance

-   1, 2, 3, or 4 independent isolated outputs across the family (GPE-1326, GPE-2323, GPE-3323, GPE-4323)
-   4.3-inch LCD display with digital panel control replacing conventional analog readouts
-   Setting and read-back resolution of 100 mV / 10 mA standard (10 mV / 1 mA selectable per user manual)
-   Tracking series and parallel operation on GPE-2323, GPE-3323, and GPE-4323 (up to 64 V series, 6 A parallel)
-   Analog Remote I/O connector for external output On/Off control
-   Set View and Key Lock functions to protect DUTs from inadvertent parameter changes
-   Low output ripple and noise of 1 mVrms (5 Hz to 1 MHz) in constant voltage operation
-   Smart cooling fan design for low acoustic noise during bench operation

The GW Instek GPE-X323 Series is a family of economical linear DC power supplies covering output power from 192 W to 217 W across four models. The series includes the single-output GPE-1326, dual-output GPE-2323, three-output GPE-3323, and four-output GPE-4323, giving electronics labs a consistent control interface and form factor whether powering a single rail or a multi-rail device under test. Each member of the series uses a linear regulation topology and a 4.3-inch LCD with digital panel control to replace the conventional knob-and-analog-meter approach found in older bench supplies.

The GPE-X323 Series is positioned for laboratory and educational facilities, product testing and quality assurance benches, service operation and post-sales support, and product development and debugging. The independent isolated outputs allow each channel to bias separate sections of a DUT without ground-loop coupling, while the tracking series and parallel modes on the multi-output models extend the voltage and current envelope of the instrument when a single higher-power rail is needed.

## Brand Heritage

GW Instek is the brand of Good Will Instrument Co., Ltd., headquartered in New Taipei City, Taiwan and founded in 1975. The company maintains subsidiaries in the United States (Instek America Corp.), China, Malaysia, the Netherlands (Good Will Instrument Euro B.V.), Korea, and Japan (operating as Texio Technology Corporation). The GW Instek name has been used continuously since the company's founding and has not been subject to acquisition or rebranding.

## Compare Other Models in This Series

The GPE-X323 Series is a four-model family of linear multi-output DC power supplies sharing a common chassis, control interface, and regulation architecture. The four models differ primarily in channel count, total output power, and the specific voltage and current envelope of each channel — letting a customer choose the model whose channel mix matches the DUT without changing operating procedures across the lab.

All four models share the same 4.3-inch LCD display, digital panel control, Set View and Key Lock functions, smart cooling fan, and Remote I/O analog On/Off interface. The GPE-2323, GPE-3323, and GPE-4323 add tracking series and parallel operation between their first two 0–32 V / 0–3 A channels, while the GPE-1326 provides a single 0–32 V / 0–6 A output without tracking modes.

Each model in the GPE-X323 Series is its own product page on valuetronics.com with new-matched pricing and inventory. The links in the comparison below take you to the page for that specific model so the buying decision is on one canonical destination per part number.

The four models partition the family by channel count and total power. The GPE-1326 is the single-channel entry at 0–32 V / 0–6 A (192 W) for benches that need one higher-current rail. The GPE-2323 doubles that to two independent 0–32 V / 0–3 A channels (192 W total) and adds tracking series and parallel operation for applications that occasionally need 0–64 V or 0–6 A from the combined pair. The GPE-3323 keeps the two programmable 0–32 V / 0–3 A channels and adds a fixed 5.0 V / 5 A logic-supply channel (217 W total), and the GPE-4323 carries four channels — two 0–32 V / 0–3 A and one each of 0–5 V / 0–1 A and 0–15 V / 0–1 A — for 212 W total when a wider mix of rail voltages is needed from one chassis.

Refer to the comparison table that follows for the per-channel voltage, current, tracking-mode, and total-power specifications side by side. Other parameters — regulation, ripple, metering resolution and accuracy, insulation, environmental ratings, and AC input — are shared across the family per the datasheet specifications table.

Model

Channels

Output Voltage

Output Current

**GPE-3323**

3

0~32V (CH1, CH2); 5V (CH3)

0~3A (CH1, CH2); 5A (CH3)

GPE-1326

1

0~32V

0~6A

GPE-2323

2

0~32V (CH1, CH2)

0~3A (CH1, CH2)

GPE-4323

4

0~32V (CH1, CH2); 0~5V (CH3); 0~15V (CH4)

0~3A (CH1, CH2); 0~1A (CH3, CH4)

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

## Accessories Supplied

-   User Manual (CD) x 1
-   Power Cord x 1
-   Test Lead GTL-104 x 3 (or European GTL-204A x 3)

## Product Core & Specifications

Parameter

GPE-3323

Number of Channels

3 (CH1, CH2, CH3)

CH1 Voltage

0~32V

CH1 Current

0~3A

CH2 Voltage

0~32V

CH2 Current

0~3A

CH3 Voltage

5V

CH3 Current

5A

Tracking Series Voltage

0~64V

Tracking Parallel Current

0~6A

Total Output Power

217W

CV Line Regulation

≤0.01%+3mV

CV Load Regulation

≤0.01%+3mV (rating current ≤3A); ≤0.02%+5mV (rating current >3A)

CV Ripple & Noise

≤1mVrms (5Hz~1MHz)

CV Recovery Time

≤100µs (50% Load Change, minimum load 0.5A)

CC Line Regulation

≤0.2%+3mA

CC Load Regulation

≤0.2%+3mA

CC Ripple & Noise

≤3mArms

Tracking Error (CH1, CH2)

≤0.1%+10mV of Master (0~32V) No Load, with Load add load regulation ≤100mV

Parallel Regulation - Line

≤0.01%+3mV

Parallel Regulation - Load

≤0.01%+3mV (rating current ≤3A); ≤0.02%+5mV (rating current >3A)

Series Regulation - Line

≤0.01%+5mV

Series Regulation - Load

≤100mV

Tracking Ripple & Noise

1mVrms (5Hz~1MHz)

CH3 Output Voltage

5.0V, ±5%

CH3 Output Current

5A

CH3 Line Regulation

≤3mV

CH3 Load Regulation

≤5mV

CH3 Ripple & Noise

1mVrms (5Hz~1MHz)

Voltage Resolution

100mV

Current Resolution

10mA

Setting Accuracy

Voltage±(0.1% of reading +30mV); Current±(0.3% of reading +6mA)

Readback Accuracy

Voltage±(0.1% of reading +30mV); Current±(0.3% of reading +6mA)

Insulation (Chassis and Terminal)

20MΩ or above (DC 500V)

Insulation (Chassis and AC Cord)

30MΩ or above (DC 500V)

Operation Temperature

0~40°C

Storage Temperature

\-10~70°C

Operating Humidity

≤80% RH

Storage Humidity

≤70% RH

Power Source

AC100V/120V/220V±10%; 230V(+10%~-6%); 50/60Hz

Dimensions

210(W) x 155(H) x 306(D) mm

Weight

Approx. 7kg

**Important:** Setting and read-back resolution is 100 mV / 10 mA by default; a higher 10 mV / 1 mA resolution mode is available per the user manual procedure on page 35, and the datasheet notes that in this mode the current or voltage adjustment may be limited by the knob sensibility.**Important:** For a higher resolution (10mV/1mA), please follow the setting procedure of the user manual on p35. When using a higher resolution, the current or voltage adjustment may be limited by the knob sensibility.**Important:** Tracking series and parallel operation is supported on the GPE-2323, GPE-3323, and GPE-4323 only. The GPE-1326 (single channel) does not support tracking series/parallel modes.**Important:** Optional European jack type terminal is available; specify the European test lead variants (GTL-204A / GTL-203A) at time of order if required.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 497.0 USD
- **Vendor:** GW Instek
- **Type:** Dc Supply
- **Tags:** DC Power Supply, Instek, Manufacturers, Power Supplies & Loads, product_manual_group_1, Product_new

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 497.00 USD | In stock |

## Images

- GPE-3323 Instek DC Power Supply

---

> Source: [ValueTronics](https://valuetronics.com/products/gpe-3323-instek-dc-power-supply-new)
> Updated: 2026-05-30