# Tektronix TPP0250 250 MHz 10X Passive Voltage Probe

# Tektronix TPP0250 250 MHz 10X Passive Voltage Probe

## Key Features At A Glance

-   300 V CAT II input voltage rating across all models in the series
-   Probe bandwidth options spanning 250 MHz, 500 MHz, and 1 GHz across the family
-   10X and 2X attenuation factors available within the family
-   10X models present less than 4 pF input capacitance for low circuit loading
-   TekVPI interface for integrated oscilloscope-and-probe communication with automatic unit scaling
-   Compact probe head and small body for probing small-geometry elements with clear DUT visibility
-   Replaceable probe tip cartridges plus a large accessory set for versatile connectivity
-   Designed for use with MDO3000, MDO4000B, MSO/DPO4000B and MSO/DPO5000B Series oscilloscopes

The Tektronix TPP-series passive voltage probes — the TPP1000, TPP0500B, TPP0502, and TPP0250 — are high-bandwidth, general-purpose probes that offer breakthrough specifications previously unrealized in this product class. They provide up to 1 GHz of analog bandwidth with less than 3.9 pF of capacitive loading and are designed for use with Tektronix MDO3000, MDO4000B, MSO/DPO4000B and MSO/DPO5000B Series oscilloscopes.

Listed applications for the series span low-power devices, service, manufacturing engineering test, and research and development. A passive voltage probe connects an oscilloscope to the device under test, scaling the measured signal so the instrument can display it accurately.

ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, keeping units on hand and ready to ship.

## Compare Other Models in This Series

The TPP family consists of four high-bandwidth, general-purpose passive voltage probes — the TPP1000, TPP0500B, TPP0502, and TPP0250 — that share a 300 V CAT II input rating, a 1.3 m cable, and the TekVPI interface while differing in bandwidth and attenuation factor.

Three of the models (TPP1000, TPP0500B, and TPP0250) use 10X attenuation with 10 MΩ input impedance and under 4 pF of input capacitance. The TPP0502 instead uses 2X attenuation with 2 MΩ input impedance and 12.7 pF of capacitance, the configuration suited to low-voltage measurements such as power-supply ripple.

Each model below is its own dedicated product page with new-condition pricing. Select the model that matches your bandwidth and attenuation requirement to view its specifications and current new availability.

Within the family, the TPP1000 provides the highest bandwidth at 1 GHz with a 10X attenuation factor, 10 MΩ / <4 pF tip input impedance, and the TekVPI interface.

The models differ principally in bandwidth and attenuation. Bandwidth steps from 250 MHz on the TPP0250, through 500 MHz on both the TPP0500B and TPP0502, to 1 GHz on the TPP1000.

Attenuation is 10X on the TPP1000, TPP0500B, and TPP0250, and 2X on the TPP0502, which also differs in tip input impedance (2 MΩ, 12.7 pF versus 10 MΩ, <4 pF on the 10X models). See the comparison table for the per-model values.

Model

Bandwidth

Attenuation

Input Impedance

**TPP0250**

250 MHz

10X

10 MΩ

TPP1000

1 GHz

10X

10 MΩ

TPP0500B

500 MHz

10X

10 MΩ

TPP0502

500 MHz

2X

2 MΩ

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

## Accessories Supplied

-   Rigid tip 3.8 mm (1) — 206-0610-00
-   Flex ground spring SHORT 3.8 mm (2) — 016-2034-00
-   Long ground spring (2) — 016-2028-00
-   Alligator ground (6 in.) (1) — 196-3521-00
-   Hook tip (regular) (1) — 013-0362-00
-   Hook tip (micro) (1) — 013-0363-00
-   IC cap (universal) 3.8 mm (1) — 013-0366-00

## Product Core & Specifications

Specification

Value

Attenuation

10X

Dynamic range

300 V Cat II

Bandwidth

250 MHz

Input impedance at the probe tip

10 MΩ, <4 pF

Cable length

1.3 m

> **Important:** Probes and accessories are not covered by the oscilloscope warranty and Service Offerings; each probe and accessory carries its own warranty and calibration terms.

> **Important:** Designed for use with Tektronix MDO3000, MDO4000B, MSO/DPO4000B and MSO/DPO5000B Series oscilloscopes.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 522.0 USD
- **Vendor:** Tektronix
- **Type:** Volt Probe
- **Tags:** Factory New, Inc., Manufacturers, Model 0250, Other Equipment, Probe, product_manual_group_1, Product_new, Tektronix, TPP0250, Volt Probe, Voltage

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 522.00 USD | In stock |

## Images

- TPP0250 Tektronix Voltage Probe

---

> Source: [ValueTronics](https://valuetronics.com/products/tpp0250-tektronix-voltage-probe-new)
> Updated: 2026-06-03