# 2450 Keithley Sourcemeter (SMU) New ### Key Features at a Glance - 200 V, 1 A, 20 W source and measure capability - 0.012% basic measure accuracy with 6.5-digit resolution - Source and measure resolution down to 20 mV and 10 nA - 5-inch high-resolution capacitive touchscreen GUI - Source and sink (4-quadrant) operation - 2450 enhanced SCPI, TSP scripting, and 2400 SCPI compatibility modes - TSP-Link channel expansion to 32 units per GPIB or IP address - Front-panel banana jacks; rear-panel triaxial input (3-lug) - Memory buffer >250,000 readings In summary, the Keithley 2450 is a 200 V, 1 A, 20 W graphical SourceMeter SMU with a five-inch color touchscreen front panel. It is the fourth-generation member of Keithley's SourceMeter family, built on the proven Model 2400 architecture and optimized for characterizing nanoscale devices, organic semiconductors, printed electronics, and low-power components. ## What is the Keithley 2450 used for? The 2450 is used for current-voltage characterization and functional test across a broad range of modern electronics: nanomaterials and graphene devices, semiconductor wafers and thin films, organic materials, e-inks, printable electronics, LEDs and AMOLEDs, photovoltaics, batteries, and small-signal discrete components. ### How does the 2450 differ from the legacy 2400? The 2450 extends the 2400's 200 mV to 200 V voltage range down to 20 mV, and its 1 µA to 1 A current range down to 10 nA. Wideband noise drops to 2 mVrms typical (vs. 4 mVrms on the 2400). The reading buffer scales from 5,000 readings to more than 250,000. Remote interfaces gain USB and Ethernet (LXI) alongside GPIB, and rear inputs move from banana to triaxial for guarded low-current work. ### Factual grounding Specification Value 20 mV range, source accuracy ±(0.100% + 200 µV) 200 mV range, source accuracy ±(0.015% + 200 µV) 200 V range, source accuracy ±(0.015% + 24 mV) 10 nA range, source accuracy (rear triax) ±(0.100% + 100 pA) 1 A range, source accuracy ±(0.067% + 900 µA) Maximum power 20 W, four-quadrant source or sink Voltage source noise (10 Hz to 1 MHz) 2 mVrms typical ### Entity authority The 2450 is the most widely deployed member of Keithley's graphical SourceMeter family. It interoperates with the 2460, 2461, 2470, DMM7510, DMM6500, DAQ6510, Series 2600B, and Series 3700A through TSP-Link — the same channel-expansion bus used in semiconductor parameter analyzer systems and university physics laboratories worldwide. ### Applications - Nanomaterials and devices: graphene, carbon nanotubes, nanowires - Semiconductor structures: wafers, thin films - Organic materials and devices: e-inks, printable electronics - LEDs, AMOLEDs, photovoltaics, and battery characterization - Two- and three-terminal discrete components: resistors, diodes, BJTs, FETs - Material characterization: resistivity, Hall effect ## Accessories Supplied Accessory Description 8608 High Performance Test Leads USB-B-1 USB Cable, Type A to Type B, 1 m CS-1616-3 Safety Interlock Mating Connector CA-180-3A TSP-Link / Ethernet Cable Documentation CD 2450 QuickStart Guide; Test Script Builder, KickStart, LabVIEW, and IVI drivers ## Product Core and Specifications The 2450 integrates a precision power supply, true current source, 6.5-digit DMM, precision electronic load, and a trigger controller in a single instrument. Keithley's TriggerFlow triggering system supports up to 255 block levels for complex test sequences, and a 2400 SCPI compatibility mode lets existing 2400-series test code run unchanged. ### Voltage source / measure Specification Value 20 mV range, measure accuracy ±(0.100% + 150 µV) 200 mV range, measure accuracy ±(0.012% + 200 µV) 2 V range, measure accuracy ±(0.012% + 300 µV) 20 V range, measure accuracy ±(0.015% + 1 mV) 200 V range, measure accuracy ±(0.015% + 10 mV) ### Current source / measure Specification Value 10 nA range, measure accuracy ±(0.10% + 50 pA) 100 µA range, measure accuracy ±(0.02% + 6 nA) 100 mA range, measure accuracy ±(0.025% + 6 µA) 1 A range, measure accuracy ±(0.03% + 500 µA) ### General Specification Value Source / sink limits ±20 V@±1.00 A; ±200 V@±100 mA Memory buffer \>250,000 readings; lithium-battery-backed NVRAM Interfaces GPIB IEEE-488.2, USB 2.0 device, Ethernet RJ-45 (10/100 BT), TSP-Link LXI compliance 1.4 LXI Core 2011 Programmability 2450 SCPI mode, 2400 SCPI mode, embedded TSP Input connections Front: banana; rear: 3-lug triaxial Power 100 to 240 VAC, 50 to 60 Hz auto-sensing, 190 VA max Dimensions (with bumpers) 106 mm H × 255 mm W × 425 mm D Weight 4.04 kg with bumpers and handle; 3.58 kg without Environment 0°C to 50°C operating; 1-hour warm-up This webpage was written by a human with an A.I. "Intern", which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer. ## Details - **Price:** 7880.0 USD - **Vendor:** Keithley - **Type:** Sou Met - **Tags:** Keithley, Manufacturers, Meters & DAQ, product_manual_group_1, Product_new, Sourcemeter, Updated Item Review ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 7880.00 USD | In stock | ## Images - 2450 Keithley Sourcemeter (SMU) New - 2450 Keithley Sourcemeter --- > Source: [ValueTronics](https://valuetronics.com/products/2450-keithley-sourcemeter-new) > Updated: 2026-05-26