# Anritsu MS2711D Handheld Spectrum Analyzer, 100 kHz to 3.0 GHz (Pre-Owned) # Anritsu MS2711D Handheld Spectrum Analyzer, 100 kHz to 3.0 GHz (Pre-Owned) ## Key Features At A Glance - Frequency coverage from 100 kHz to 3.0 GHz (tuneable to 9 kHz) for field spectrum analysis - Noise floor ≤ -135 dBm (100 Hz RBW, full span, preamp on) for low-level signal measurement - +43 dBm (20 watts) maximum safe input power without damage in harsh RF environments - Full span sweep in ≤ 1.1 seconds; zero-span sweep from ≤ 50 µs up to 20 seconds - One-button measurements for field strength, channel power, occupied bandwidth, ACPR, C/I, and interference analysis - Built-in AM, narrowband FM, wideband FM, and SSB (selectable USB/LSB) demodulator with internal speaker - Internal memory stores up to 15 test setups and 200 measurement traces - Weighs less than five pounds fully loaded with NiMH battery for handheld tower and field use The Anritsu MS2711D is a handheld spectrum analyzer designed for fast, accurate, repeatable, portable spectrum analysis across the 100 kHz to 3.0 GHz frequency range. The instrument combines a ruggedized chassis intended for field environments with a battery-operated, ultra-lightweight form factor that allows spectrum analysis measurements to be conducted away from the bench. The MS2711D pairs broad measurement capability with a menu-driven user interface and a high-resolution 640x480 display available in monochrome or color (Option 3). The MS2711D is built to locate, identify, record, and resolve communication systems problems. The datasheet positions the instrument for installation, maintenance, and troubleshooting work, including locating the source of interfering signals. Dedicated one-button routines support field strength, channel power, occupied bandwidth, Adjacent Channel Power Ratio (ACPR), C/I, and interference analysis — measurements the datasheet identifies as critical for today's wireless communication systems. With the optional FCN4760 frequency converter, the MS2711D extends into the 4.7 to 6.0 GHz range, supporting fixed wireless engineers responsible for design, deployment, and optimization of 802.11a networks and interference analysis at those frequencies. ## Brand Heritage Anritsu is a Japanese precision measurement company with roots dating to 1895. The company's RF and microwave measurement portfolio was significantly expanded by its 1993 acquisition of Wiltron Company, which brought network analyzer, scalar analyzer, and signal generator product lines into Anritsu. Used instruments from the Wiltron name are part of the same product lineage as instruments currently sold under Anritsu, and Anritsu has continued to develop the field RF and infrastructure test product families — including the Site Master cable and antenna analyzer family and the Spectrum Master handheld spectrum analyzer family — as core franchises in its handheld instrument business. ## Accessories Supplied - 10580-00097 User's Guide - Soft Carrying Case - AC – DC Adapter - Automotive Cigarette Lighter/12 Volt DC Adapter - One Year Warranty - CD ROM containing Handheld Software Tools - Serial Interface Cable - Rechargeable battery, NiMH ## Product Core & Specifications Category Specification Value Frequency Frequency Range 100 kHz to 3.0 GHz (tuneable to 9 kHz) Frequency Frequency Reference: Aging ±1 ppm/yr Frequency Frequency Reference: Accuracy ±2 ppm Frequency Frequency Span 10 Hz to 2.99 GHz in 1, 2, 5 step selections in auto mode, plus zero span Frequency Sweep Time ≤1.1 sec full span; ≤50 µsec to 20 sec selectable in zero span Frequency Resolution Bandwidth (–3 dB width) 100 Hz to 1 MHz in 1-3 sequence, ±5% Frequency Video Bandwidth (–3 dB) 3 Hz to 1 MHz in 1-3 sequence, ±5% typical Frequency SSB Phase Noise (1 GHz) at 30 kHz Offset ≤–75 dBc/Hz Frequency Spurious Responses Input Related ≤–45 dBc Frequency Spurious Residual Responses ≤–90 dBm, ≥10 MHz; ≤–80 dBm, <10 MHz (10 kHz RBW, pre-amp on) Amplitude Total Level Accuracy ±1 dB typical (±1.5 dB max), ≥10 MHz to 3 GHz; ±2 dB typical <10 MHz for input signal levels ≥–60 dBm, excluding input VSWR mismatch Amplitude Measurement Range +20 dBm to –135 dBm Amplitude Input Attenuator Range 0 to 51 dB, selected manually or automatically coupled to the reference level. Resolution in 1 dB steps. Amplitude Displayed Average Noise Level (Input terminated, 0 dB atten.), RMS detection, 100 Hz RBW ≤–135 dBm, ≥10 MHz (preamp on); ≤–115 dBm, <10 MHz (preamp on) Amplitude Dynamic Range \>65 dB, typical Amplitude Display Range 1 to 15 dB/division, in 1 dB steps, 10 divisions displayed Amplitude Scale Units dBm, dBV, dBmV, dBµV, V, W Amplitude RF Input VSWR (with ≥20 dB attenuation) 1.5:1 typical, (10 MHz to 2.4 GHz) General Internal Trace Memory 200 maximum General Setup Storage 15 test setups General Display VGA Monochrome or VGA Color (option 3) with adjustable backlight General RF Out Type N, female, 50Ω General RF Out: Maximum Input without Damage +23 dBm, ±50 VDC General RF In Type N, female, 50Ω General RF In: Maximum Input without Damage +43 dBm (peak), ±50 VDC General Serial Interface RS-232 9 pin D-sub, three wire serial General Electromagnetic Compatibility Meets European community requirements for CE marking General Safety Conforms to EN 61010-1 for Class 1 portable equipment General Operating Temperature –10°C to 55°C, humidity 85% or less General Non-operating Temperature –51°C to +71°C (Recommend the battery be stored separately between 0°C and 40°C for any prolonged storage period.) General Environmental MIL-PRF-28800F Class 2 General Power Supply: External DC Input +12.5 to +15 volts dc, 3A max General Power Supply: Internal NiMH battery, 10.8 volts, 1800 mAh General Dimensions (W x H x D) 25.4 cm x 17.8 cm x 6.10 cm (10.0 in x 7.0 in x 2.4 in) General Weight 2.14 kg (4.7 lbs.) includes battery; 2.28 kg (5 lbs) includes transmission measurement signal source **Important:** Maximum input without damage: +43 dBm peak (20 W), ±50 VDC on the RF In port (Type N, female, 50 Ω). Total level accuracy of ±1 dB typical applies for input signal levels ≥ -60 dBm from 10 MHz to 3 GHz, excluding input VSWR mismatch.**Important:** Option 3 Color Display: High Resolution VGA — recommended for indoor use only.**Important:** Non-operating temperature range is –51°C to +71°C; manufacturer recommends the battery be stored separately between 0°C and 40°C for any prolonged storage period.**Important:** Maximum input without damage at RF In is +43 dBm (peak), ±50 VDC; at RF Out is +23 dBm, ±50 VDC. Exceeding these limits may damage the instrument.Recommended pairing: combine the MS2711D with the optional FCN4760 frequency converter (4.7 to 6.0 GHz) when the application includes 802.11a network deployment, optimization, or interference analysis above 3 GHz. The FCN4760 requires Option 6 (frequency converter controller module) installed in the MS2711D. ## About this used unit - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 675.0 USD - **Vendor:** Anritsu - **Type:** Spec An - **Tags:** Analyzers, Anritsu, Manufacturers, product_manual_group_1, Product_used, Spectrum ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 525.00 USD | In stock | | NIST Traceable with Full Data | 600.00 USD | In stock | | ISO IEC 17025 Accredited | 675.00 USD | In stock | ## Images - Anritsu MS2711D Handheld Spectrum Analyzer, 100 kHz to 3.0 GHz (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/ms2711d-anritsu-spectrum-analyzer-used) > Updated: 2026-05-30