# 2707B B&K Precision Multimeter New

**Additional Features:**

-   Magnetic hanger
-   One-handed operation
-   True RMS
-   Measures up to 10 A (AC & DC)
-   DC voltage to 1000 V
-   AC voltage to 750 V
-   Resistance to 2000 MΩ
-   Capacitance to 20 uF
-   Continuity test
-   Diode test
-   Logic test
-   hFE Transistor test
-   **One Year Warranty**

**Specifications**

**DC Volts**

-   Ranges: 200 mV, 2 V, 20 V, 200 V, 1000V
-   Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
-   Accuracy: ± (0.8 % rdg + 1 dgts)
-   Input Impedance: 10 MΩ
-   Overload Protection: 1000 VDC or 750 VACrms

**AC Volts (50 Hz-500 Hz)**

-   True RMS: Applies
-   Ranges: 200 mV, 2 V, 20 V, 200 V, 750V
-   Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
-   Accuracy: 200 mV & 20 V ranges: ± (1.5 % rdg + 8 dgts); 200 V & 750 V ranges: ± (2.0 % rdg + 8 dgts)
-   Crest Factor: <3
-   Input Impedance: 10 MΩ
-   Overload Protection: 1000 VDC or 750 VACrms

**DC Current**

-   Ranges: 20 mA, 200 mA, 10 A
-   Resolution: 10 uA, 100 uA, 10 mA
-   Accuracy: 20 mA to 200 mA ranges: ± (1.0 % rdg + 1 dgts); 10 A range: ± (3.5 % rdg + 3 dgts)
-   Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
-   10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period

**AC Current (50 Hz-500 Hz)**

-   True RMS: Applies
-   Ranges: 20 mA, 200 mA, 10 A
-   Resolution: 10 uA, 100 uA, 10 mA
-   Accuracy: 20 mA to 200 mA ranges: ±(2.0 % rdg + 8 dgts); 10 A range: ± (3.5 % rdg + 8 dgts)
-   Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
-   Crest Factor: <3
-   10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period

**Resistance**

-   Ranges: 200 Ω, 2 kΩ, 200 kΩ, 20 MΩ, 2000 MΩ
-   Resolution: 0.1 Ω, 1.0 Ω, 100 Ω, 10 kΩ, 1 MΩ
-   Accuracy: 200 Ω to 200 kΩ ranges: ± (1.0 % rdg + 4 dgts); 20 MΩ range: ± (2.0 % rdg + 4 dgts); 2000 MΩ range: ± (5.0 % rdg + 10 dgts)
-   Open Circuit Voltage (typical): 0.3 VDC (3.0 VDC on 200 Ω, 2000 MΩ range)
-   Overload Protection: 500 VDC/ACrms

**Capacitance**

-   Ranges: 2 nF , 20 nF, 200 nF, 2.0 uF, 20 uF
-   Resolution: 1 pF, 10 pF, 100 pF, 1 nF, 10 nF
-   Accuracy: ± (4 % rdg + 10 dgts)
-   Overload Protection: Discharge capacitor before connecting

**Frequency**

-   Ranges: 2 kHz, 20 kHz, 200 kHz, 2 MHz, 20 MHz
-   Resolution: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz
-   Accuracy: ± (0.1 % rdg + 3 dgts)
-   Sensitivity: 2.0 Vrms minimum
-   Minimum Pulse Width: >25 ns
-   Duty Cycle Limits: >30 % and <70 %
-   Overload Protection: 500 VDC/AC rms

**Diode Test**

-   Test Current: 1.0 mA (typical)
-   Resolution: 10 mV
-   Accuracy: ± (1.5 % rdg + 3 dgts)
-   Open Circuit Voltage: 3.0 VDC (typical)
-   Overload Protection: 500 VDC/ACrms

**Continuity**

-   Audible Indication: Less than 100 Ω
-   Response Time: 100 ms
-   Overload Protection: 500 VDC/ACrms

**Transistor hFE**

-   Range: 0 to 1000
-   Base Current: Approximately 10 uADC (VCE = 3.0 VDC)

**Logic Test**

-   Threshold: Logic Hi (2.8 V +0.8 V) / Logic Lo (0.8 V +0.5 V)
-   Indication: 40 msec beep at logic Lo
-   Overload Protection: 500 VDC/AC rms

**General**

-   Display: 3 ½-digit, 2000 count LCD
-   Polarity: Automatic, positive implied, negative polarity indication
-   Overrange: OL or -OL is displayed
-   Low Battery Indication: The battery symbol will display when battery voltage drops below operating levels
-   Measurement Rate: 2.5 times per second
-   Auto Power Off: Approximately 10 minutes
-   Operating Environment: 0ºC to 50ºC at <70 % relative humidity
-   Storage Environment: -20ºC to 60ºC at 0 to 80 % relative humidity
-   Accuracies: Stated accuracy at 23ºC +5ºC at <75 % relative humidity
-   Temperature Coefficient: 0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
-   Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
-   Battery Life: 150 hours typical
-   Dimensions: 165 mm (H) x 78 mm (W) x 42.5 mm (D)
-   Accessories Supplied: One set test leads, one spare fuse, 9V battery (installed) and instruction manual

The 2707B is a full-featured manual ranging true RMS DMM that combines performance, value and functionality. The 2000 count LCD can display resistance values up to 2 GΩ, capacitance to 20 uF, or a transistors common-emitter gain value up to 1000. Value-packed features make this meter a must in every "Tool Kit".

## Details

- **Price:** 112.0 USD
- **Vendor:** B&K Precision
- **Type:** Multi Met
- **Tags:** BK Precision, Manufacturers, Meters & DAQ, Multimeter, product_manual_group_1, Product_new

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 112.00 USD | In stock |

## Images

- 2707B B&K Precision Multimeter New

---

> Source: [ValueTronics](https://valuetronics.com/products/2707b-b-k-precision-multimeter-new)
> Updated: 2026-05-21