# 6218A Agilent DC Power Supply Used

**Additional Features:**

-   Voltage: 50V
-   Current: 0.2A
-   Power: 10W
-   Load Effect: 4 mV
-   Source Effect: 4 mV
-   PARD: 200 µA/1 mV
-   Low Ripple and Noise
-   Compact, Impact-resistant stackable case
-   Short-circuit proof
-   Dual function metering
-   Coarse and fine output voltage controls
-   Designed for Bench Use

The Agilent 6218A is a 50V, 0.2A DC Power Supply that is designed for general laboratory use and is equipped with front-panel mounted voltage controls, a combination volt/ammeter, and output binding posts. Output voltage is continuously variable, via coarse and fine controls from 0 V to 15% above the maximum rated output. A switch selects either output voltage or current for display on the panel meter.

Load connections are made via three binding posts. Either the + or the - post may be grounded through an adjacent GND terminal or the supply may be operated floating at up to 300 volts above ground.

The Constant Voltage/Constant Current Model has concentric coarse and fine current controls which allow setting the current-limit point to any value within the current rating. Using these controls, the CV/CC supplies can also be operated as constant current sources with 500 µA load regulation. All CV/CC models can be connected in series or parallel.

## Details

- **Price:** 0.0 USD - 280.0 USD
- **Vendor:** Agilent
- **Type:** Dc Supply
- **Tags:** Agilent, Agilent Keysight, DC Power Supply, Manufacturers, Power Supplies & Loads, product_manual_group_1, Product_used

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| None | 0.00 USD | In stock |
| NIST Traceable | 210.00 USD | In stock |
| NIST Traceable with Full Data | 245.00 USD | In stock |
| ISO IEC 17025 Accredited | 280.00 USD | In stock |

## Images

- 6218A Agilent DC Power Supply Used

---

> Source: [ValueTronics](https://valuetronics.com/products/6218a-agilent-dc-power-supply-used)
> Updated: 2026-05-21