# Agilent 4287A 1 MHz - 3 GHz RF LCR Meter (Pre-Owned)

# Agilent 4287A 1 MHz - 3 GHz RF LCR Meter (Pre-Owned)

## Key Features At A Glance

-   Test frequency range of 1 MHz to 3 GHz with 100 kHz resolution
-   Basic measurement accuracy of ±1.0% across the impedance measurement range
-   Measurement speed of 9 msec per point at maximum speed for high-throughput production testing
-   List-sweep capability with up to 32 points per sweep for multi-frequency characterization
-   RF I-V measurement method delivers accurate impedance measurement over a wider impedance range than network analyzers
-   GPIB, LAN, and opto-isolated handler interfaces standard for automated component handler integration
-   Built-in Rdc (DC resistance) measurement function for contact check during automated handler testing
-   Multi-function comparator with 13 bins and 4 limit values per bin for production sorting

The Agilent 4287A is a high performance RF LCR meter designed for production line testing of devices such as SMD inductors and EMI filters, where impedance testing at high frequencies is required. The instrument covers a test frequency range of 1 MHz to 3 GHz with 100 kHz resolution and offers measurement parameters including |Z|, θz, |Y|, θy, X, G, B, Ls, Lp, Cs, Cp, Rs, Rp, Q, and D with five-digit display resolution. The 4287A uses the RF I-V measurement method, which measures the current flowing through the device under test and the voltage applied across it, enabling accurate characterization over the full 1 MHz to 3 GHz range.

The 4287A is built for production line testing of RF SMD inductors and EMI filters, research and development of next-generation passive components, and reliable quality control of wireless communication equipment components. The instrument supports automated component handler integration through its opto-isolated handler interface, and the small test head with 1 m test cable extends the measurement plane to the handler stage without introducing additional error. The multi-function comparator with 13 bins and four limit values per bin supports bin sorting workflows where conditions such as frequency and measurement parameters can be set independently in each column.

## Brand Heritage

Agilent Technologies was spun out of Hewlett-Packard in 1999 when HP separated its test and measurement business from its computing business. In 2014, Agilent split again, with the electronic measurement instruments business — including the 4287A product line — transferring to Keysight Technologies. Instruments carrying the Agilent brand on their front panels are part of the same engineering lineage as today's Keysight Technologies products.

## Accessories Supplied

-   Test head with 1 m test cable
-   N (m) - SMA (f) Adapter
-   Wrench for 3.5/SMA connector
-   CD-ROM (Operation manual, Programming manual and Sample Program)
-   Power cord

## Product Core & Specifications

Parameter

Specification

Test frequency

1 MHz - 3 GHz with 100 kHz resolution. With list-sweep, up to 32 points per sweep is available.

Impedance parameters

|Z|, θz (rad), θz (deg), |Y|, θy (rad), θy (deg), X, G, B, Ls, Lp, Cs, Cp, Rs, Rp, Q, D

Display resolutions

5 digits

Test signal level

V (open condition): 4.47 mVrms - 502 mVrms (447 mVrms when >1 GHz); I (short condition): 0.0894 mArms - 10 mArms (8.94 mArms when >1 GHz)

Basic accuracy

± 1.0%

Measurement range

200 mΩ to 3 kΩ (@1 MHz, accuracy ≤10%)

Measurement time

9 msec per point (max. speed)

Measurement terminal

3.5 mm (female)

Calibration and compensation

Open/short/load/low-loss capacitor calibration, fixture electrical length compensation, open/short compensation

Rdc measurement function

For contact check (on/off selectable)

Data storage devices

About 18 Gbyte internal hard disk and 1.44 Mbyte floppy disk

Interface

GPIB, LAN (10base-T/100base-TX automatically switched), and Opto-isolated handler interface

Display

8.4 inch color LCD

List sweep points

Up to 256 multiple frequency points (32 points max./table × 8 tables max.)

Comparator bins

13 bins, with four limit values for each bin

**Important:** Maximum test signal level is 502 mVrms (447 mVrms above 1 GHz) in the open condition and 10 mArms (8.94 mArms above 1 GHz) in the short condition. Measurement accuracy is specified at the test head.**Important:** A keyboard and a mouse are required for initial setup of the 4287A (available as options 4287A-810 keyboard and 4287A-820 mouse).**Important:** Test fixture is not included with the base unit; an appropriate 7-mm test fixture (e.g., 16196A/B/C/D, 16197A, 16192A, or 16194A) must be ordered separately based on the DUT size, shape, and application.**Important:** Measurement accuracy is specified at the test head. When using a test fixture, perform open/short/load calibration with a working load standard at the measurement plane for accurate results.**Important:** Manuals are not furnished as standard for the SMD test fixture accessories. For 16196A/B/C/D, magnifying lens and tweezers are not furnished as standard.Recommended pairing: use the 16196A, 16196B, 16196C, or 16196D SMD test fixture matched to your chip size (1608 through 0402 mm) for measurements to 3 GHz, or the 16200B external DC bias adapter when applying DC bias to EMI filters up to 1 GHz.

## About this used unit

-   Warranty included
-   Functional verification included
-   Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
-   Note that unnecessary accessories may not be included (contact Test Architect to confirm).

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 0.0 USD
- **Vendor:** Agilent
- **Type:** Lcr Meter
- **Tags:** Agilent, Agilent Keysight, LCR, Manufacturers, Meters & DAQ, product_manual_group_1, Product_used, Updated Item Review

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| None | 0.00 USD | In stock |
| NIST Traceable | 0.00 USD | In stock |
| NIST Traceable with Full Data | 0.00 USD | In stock |

## Images

- 4287A Agilent LCR Meter

---

> Source: [ValueTronics](https://valuetronics.com/products/4287a-agilent-lcr-meter-used)
> Updated: 2026-05-30
