# Tektronix TDP3500 3.5 GHz Differential Probe

# Tektronix TDP3500 3.5 GHz Differential Probe

## Key Features At A Glance

-   Maximum non-destruct input voltage ±25 V (TDP1500) or ±15 V (TDP3500/TDP4000), DC + peak AC
-   Differential bandwidth from 1.5 GHz to 4 GHz across the three models for serial and digital applications
-   \>60 dB CMRR at 1 MHz and >25 dB at 1 GHz to reduce errors in higher common-mode environments
-   Low capacitive and resistive loading maintains signal fidelity and reduces DC biasing interactions
-   Connects directly to and is powered by TekVPI interface oscilloscopes, with no external power supply
-   Compact probe head with DUT attachment accessories for probing small-geometry elements and fine-spaced SMDs
-   Remote GPIB/USB probe control through the host oscilloscope
-   AutoZero output-offset nulling plus automatic units scaling and readout on the oscilloscope display

The Tektronix TDP1500, TDP3500 and TDP4000 are differential-ended active probes engineered for truer signal reproduction and fidelity in high-frequency measurements. Built with ultra-low input capacitance and versatile device-under-test connection capabilities, they deliver the high-speed electrical and mechanical performance demanded by today's digital system designs. Each model connects directly to and draws power from oscilloscopes equipped with the TekVPI probe interface, forming an integrated scope-and-probe measurement system.

These probes are intended for the design, validation, debugging, and characterization of common high-speed serial bus designs, including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, and FireWire (1394b). They also support signal integrity, jitter, and timing analysis, and are applied across manufacturing, engineering, and test environments.

That means real inventory under our control and people who know the instruments behind every order.

## Brand Heritage

Tektronix, Inc. has marketed test and measurement instruments under the Tektronix name for decades. The company was acquired by Danaher Corporation in 2007 and, following Danaher's 2016 spinoff of its test and measurement businesses, has operated as part of Fortive Corporation, continuing to sell under the Tektronix brand.

## Compare Other Models in This Series

The TDP1500, TDP3500 and TDP4000 form a family of differential-ended active probes that share a common TekVPI interface and measurement architecture while differing in bandwidth and front-end loading. All three deliver truer signal reproduction and fidelity for high-frequency, high-speed serial and digital measurements, connecting directly to and drawing power from TekVPI interface oscilloscopes.

Across the family, the probes share common-mode rejection of greater than 60 dB at 1 MHz and greater than 25 dB at 1 GHz, automatic units scaling and readout, AutoZero offset nulling, and remote GPIB/USB control through the oscilloscope. The choice between models comes down to required bandwidth and the input loading and voltage characteristics summarized below.

Each model below is listed as its own dedicated new product page with condition-matched pricing. Select the specific model and condition that fits your application to see availability and pricing for that new unit.

The models are separated primarily by bandwidth: 1.5 GHz on the TDP1500, 3.5 GHz on the TDP3500, and 4 GHz on the TDP4000, with rise times of ≤265 ps (TDP1500), ≤140 ps (TDP3500), and ≤125 ps (TDP4000). Front-end loading also differs — the TDP1500 presents ≤1 pF differential input capacitance and 200 kΩ differential input resistance, while the TDP3500 and TDP4000 present ≤0.3 pF and 100 kΩ.

Maximum non-destruct input voltage is ±25 V (DC + peak AC) on the TDP1500 versus ±15 V on the TDP3500 and TDP4000. Attenuation is 1X/10X on the TDP1500 and 5X on the TDP3500, and the TDP1500 offers a wider common-mode input range (±7 V) and differential input dynamic range than the TDP3500/TDP4000 (+5 V to -4 V, ±2 V). These differences are detailed in the comparison table below.

Model

Bandwidth

Differential Input Capacitance

Differential Input Resistance

**TDP3500**

≥3.5 GHz

≤0.3 pF

100 kΩ

TDP1500

≥1.5 GHz

≤1 pF

200 kΩ

TDP4000

≥4 GHz

≤0.3 pF

100 kΩ

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

## Accessories Supplied

-   Pouch, nylon carrying case with inserts (016-1952-xx)
-   Certificate of traceability
-   Probe tip cover (200-4236-xx)
-   Antistatic wrist strap (006-3415-xx)
-   Accessory kit TDP3500/TDP4000 (020-2883-xx), containing: plastic accessory box, square pin adapter (4), variable spacing tip adapter (4), Y-lead adapter (2), Micro CKT test tip (3), 3-inch ground lead (2), marker band set (2 each of 5 colors)
-   Accessory kit (solder-in differential probes TDP3500/TDP4000, P6330, P7330, P7350) (020-2505-xx), containing: adapter resistor/wire (2), wire assembly w/ 0.02 diameter (10), wire assembly w/ 0.008 diameter (10), 10 Ω resistor w/ 0.02 diameter wire (10), 10 Ω resistor w/ 0.008 diameter wire (10), 20 Ω resistor w/ 0.02 diameter wire (10), 20 Ω resistor w/ 0.008 diameter wire (10)

## Product Core & Specifications

Specification

Value

Warranted characteristics

Rise time (probe only)

≤140 ps

Attenuation

5X

CMRR

\>60 dB at 1 MHz, >25 dB at 1 GHz

Maximum input voltage (nondestruct)

±15 V (DC + pk AC)

Typical characteristics

Bandwidth (probe only)

≥3.5 GHz

Differential input capacitance

≤0.3 pF

Differential input resistance

100 kΩ

Noise level

≈35 nV/√Hz

Propagation delay

5.4 ns

Common mode input range

+5 V to -4 V

Input offset range

±1 V displayed

Differential input dynamic range

±2 V

Nominal characteristics

Recommended oscilloscope interface

TekVPI™ Probe

Power requirements

Powered directly by oscilloscopes with the TekVPI probe interface.

Physical characteristics

Cable length

1200 mm (48 in)

Weight (probe only)

160 g (5.4 oz)

> **Important:** Maximum non-destruct input voltage: ±25 V (TDP1500) and ±15 V (TDP3500/TDP4000), DC + peak AC.

> **Important:** These probes connect directly to and are powered from oscilloscopes with the TekVPI™ probe interface; a TekVPI-interface oscilloscope is required for operation, and no external power supply is needed.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 10000.0 USD
- **Vendor:** Tektronix
- **Type:** Diff Probe
- **Tags:** Datasheet Reviewed 2026, Diff Probe, Differential, Factory New, Inc., Manufacturers, Model 3500, Other Equipment, Probe, product_manual_group_1, Product_new, TDP3500, Tektronix

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 10000.00 USD | In stock |

## Images

- Tektronix TDP3500 3.5 GHz Differential Probe

---

> Source: [ValueTronics](https://valuetronics.com/products/tdp3500-tektronix-differential-probe-new)
> Updated: 2026-06-02