# MS710C Anritsu Spectrum Analyzer Used

**Additonal Features:**

-   Frequency range: 100 kHz to 23 GHz
-   Input Impedance: 50 Ohm 
-   Zero Span: Yes 
-   Span: 0.1 MHz-1 GHz
-   Minimum Sweep Time: 10 ms 
-   Maximum Sweep Time: 10 s 
-   Resolution Bandwidth: 1 kHz-1 MHz
-   Resolution Bandwidth Steps: 1/3/10 
-   Video Bandwidth: 100 Hz-10 kHz
-   Video Bandwidth Steps: 1/10/100 
-   Maximum Single-Side-Band Noise: -70 dBc/Hz 
-   Maximum Safe AC Input: 20 dBm 
-   Maximum DC Input: 100 V 
-   Maximum Displayed Average Noise: -115 dBm 
-   Maximum Amplitude Uncertainty: 1.5 % 
-   Trigger Modes: Freerun,TTL 
-   Connector type (main signal): Type-N(f) 
-   Cal Output Connector Type: BNC(f) 

The Anritsu MS710C spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS710C. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use it to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS710C spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

## Details

- **Price:** 0.0 USD - 675.0 USD
- **Vendor:** Anritsu
- **Type:** Spec An
- **Tags:** Analyzers, Anritsu, Manufacturers, product_manual_group_1, Product_used, Spectrum

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| None | 0.00 USD | In stock |
| NIST Traceable | 525.00 USD | In stock |
| NIST Traceable with Full Data | 600.00 USD | In stock |
| ISO IEC 17025 Accredited | 675.00 USD | In stock |

## Images

- MS710C Anritsu Spectrum Analyzer Used

---

> Source: [ValueTronics](https://valuetronics.com/products/ms710c-anritsu-spectrum-analyzer-used)
> Updated: 2026-05-21