# Anritsu MT8220T BTS Master High Performance Handheld Base Station Analyzer (Pre-Owned) # Anritsu MT8220T BTS Master High Performance Handheld Base Station Analyzer (Pre-Owned) ## Key Features At A Glance - Three instruments in one handheld: 400 MHz to 6 GHz Cable and Antenna Analyzer, 150 kHz to 7.1 GHz Spectrum Analyzer, and 10 MHz to 7.1 GHz Power Meter - Cable and Antenna Analyzer with greater than 100 dB 2-port dynamic range (400 MHz to 2800 MHz, output power high, 25-trace average) and 2-port gain measurement uncertainty under 0.45 dB - Spectrum Analyzer DANL to -163 dBm in 1 Hz RBW (typical, preamp on, 3 MHz to 1.0 GHz), greater than 95 dB dynamic range, and -100 dBc/Hz phase noise at 10 kHz offset - RF immunity of +17 dBm on-channel and +10 dBm on-frequency for cable and antenna measurements in live transmitter environments - Burst Detect sweep mode captures 1000 sweeps in a 15 MHz span for intermittent interference detection - Standard internal GPS receiver delivers frequency accuracy of ±2.5 × 10⁻⁸ with GPS on, and tags stored traces with time, latitude, longitude, and altitude - 8.4-inch touchscreen display (800 x 600), 2.5-hour typical battery operation, and under 5-minute warm-up time - Extensive optional measurement coverage including LTE/LTE-A FDD/TDD, GSM/GPRS/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSPA+, CDMA/EV-DO, WiMAX, CPRI RF, and an integrated Vector Signal Generator The Anritsu MT8220T BTS Master is a high-performance handheld base station analyzer designed for installation and maintenance of wireless networks. It combines a 400 MHz to 6 GHz Cable and Antenna Analyzer, a 150 kHz to 7.1 GHz Spectrum Analyzer, and a 10 MHz to 7.1 GHz Power Meter in a single ruggedized touchscreen instrument weighing 4.6 kg (10.2 lb), with dimensions of 315 mm x 211 mm x 77 mm. The MT8220T is built for the field technician and base station engineer who needs cable and antenna line sweeping, signal analysis for cellular standards, ultra-sensitive spectrum analysis, interference tracking, and — with the optional Vector Signal Generator — receiver testing, all from one tool. Application coverage spans LTE/LTE-A FDD/TDD, GSM/GPRS/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSPA+, CDMA/EV-DO, and WiMAX Fixed/Mobile signal analysis when the corresponding measurement options are installed. ValueTronics International, LLC stocks, tests, and ships test and measurement equipment from our 20,000 square foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every {{CONDITION}} MT8220T leaves our facility after hands-on verification by our technicians — not a passing visual check, but documented performance assessment against the manufacturer's published specifications. That accountability is what separates a professional T&M reseller from a drop-shipper or pass-through broker, and it is the reason base station contractors, wireless infrastructure teams, and defense electronics labs come back to ValueTronics for their next instrument. ## Brand Heritage Anritsu Corporation is a long-established Japanese precision measurement company. Anritsu's North American RF measurement presence was significantly expanded by its 1990s acquisition of Wiltron Company, the US-based RF instrument maker — Wiltron-era VNAs and analyzers are now Anritsu-lineage instruments fully supported through the current Anritsu service organization. ## Accessories Supplied - Handheld Instruments Documentation Disc (10920-00060) - Anritsu Software Tool Box for Handheld RF Instruments Disc (2300-577) - Soft Carrying Case (2000-1685-R) - GPS Antenna, SMA(m), 25 dB gain, 2.5 VDC to 3.7 VDC (2000-1760-R) - Stylus with Coiled Tether (2000-1691-R) - Rechargeable Li-Ion Battery, 7500 mAh (633-75) - AC/DC Power Supply (40-187-R) - Automotive Power Adapter, 12 VDC, 60 Watts (806-141-R) - Ethernet Cable, 213 cm / 7 ft (2000-1371-R) - USB A-mini B Cable, 305 cm / 10 ft (3-2000-1498) - Certificate of Calibration ## Product Core & Specifications Category Specification Value Cable and Antenna Analyzer Measurements Types VSWR, Return Loss, Cable Loss, DTF VSWR, DTF Return Loss, 1-port Phase, 2-port Phase, 2-port Gain, Smith Chart Frequency Range 400 MHz to 6 GHz Frequency Accuracy ± 3.0 × 10\-6 Frequency Resolution 1 kHz (RF immunity low); 100 kHz (RF immunity high) Output Power High \-7 dBm, typical, 1 or 2-port Output Power Low \-40 dBm, typical, 2-port Dynamic Range (output power high, 25-trace average) 400 MHz to 2800 MHz \> 100 dB, 110 dB typical Dynamic Range \> 2800 MHz to 4000 MHz \> 90 dB Dynamic Range \> 4000 MHz to 6000 MHz \> 85 dB Interference Immunity On-Channel +17 dBm @ >1.0 MHz from carrier frequency Interference Immunity On-Frequency +10 dBm within ±10 kHz from the carrier frequency Measurement Speed Return Loss / DTF ≤ 4.5 ms/data point, RF immunity low, typical Return Loss Range / Resolution 0 dB to 60 dB / 0.01 dB VSWR Range / Resolution 1:1 to 65:1 / 0.01 Cable Loss Range / Resolution 0 dB to 30 dB / 0.01 dB 2-Port Gain Range / Resolution \-120 dB to +100 dB / 0.01 dB Distance-to-Fault Horizontal Range 0 to (Data Points-1) × Fault Resolution, to a maximum of 1500 m (4921 ft) Phase Range / Resolution \-180° to +180° / 0.01° Measurement Accuracy Corrected Directivity \> 42 dB Spectrum Analyzer Frequency Range 150 kHz to 7.1 GHz (usable to 0 Hz) Maximum Continuous Input +30 dBm Tuning Resolution 1 Hz Frequency Reference Aging ± 1.0 × 10\-6/10 years Frequency Span Accuracy ± 3 × 10\-7 (25 °C ± 25 °C) + aging, 10 Hz to 7.1 GHz including zero span Sweep Time Minimum 100 ms, 10 µs to 600 s in zero span Sweep Time Accuracy ± 2 % in zero span Resolution Bandwidth (RBW) 1 Hz to 3 MHz in 1-3 sequence ± 10 % (-3 dB bandwidth) Video Bandwidth (VBW) 1 Hz to 3 MHz in 1-3 sequence ± 10 % (-3 dB bandwidth) SSB Phase Noise \-100 dBc/Hz @ 10 kHz, 20 kHz, and 30 kHz offset from carrier; -102 dBc/Hz @ 100 kHz offset Dynamic Range \> 95 dB (600 MHz, 3.5 GHz), 2/3 (TOI-DANL) in 1 Hz RBW Measurement Range DANL to +30 dBm Reference Level Range \-120 dBm to +30 dBm Attenuator Resolution 0 dB to 65 dB, 5.0 dB steps DANL (1 Hz RBW, Preamp On) 3 MHz to 1.0 GHz \-161 dBm max / -163 dBm typical DANL (1 Hz RBW, Preamp On) \> 1.0 GHz to 2.2 GHz \-159 dBm max / -160 dBm typical DANL (1 Hz RBW, Preamp On) \> 2.2 GHz to 4.0 GHz \-156 dBm max / -159 dBm typical DANL (1 Hz RBW, Preamp On) \> 4.0 GHz to 7.1 GHz \-154 dBm max / -156 dBm typical Third-Order Intercept (TOI) 600 MHz / 3.5 GHz +8 dBm typical / +9 dBm typical (Preamp Off) Second Harmonic Distortion Preamp Off \-50 dBc maximum, -70 dBc typical VSWR < 4.0 GHz / 4.0 to 7.1 GHz 1.5:1 typical / 1.8:1 typical GPS Receiver High Frequency Accuracy GPS Antenna connected ± 2.5 × 10\-8 with GPS On, 3 minutes after satellite lock GPS Lock Accuracy Antenna disconnected ± 5.0 × 10\-8 for 3 days, 0 °C to 50 °C ambient temperature Connector SMA, female Power Meter (Internal) Frequency Range 10 MHz to 7.1 GHz Span 1 kHz to 100 MHz Display Range \-140 dBm to +30 dBm, ≤ 40 dB span Measurement Range \-120 dBm to +30 dBm Offset Range 0 dB to +100 dB VSWR 1.5:1 typical Maximum Power +30 dBm without attenuator Connectors RF Out Type N, female, 50 Ω, Maximum Input +23 dBm, ± 50 VDC, (Reflection In) RF In Type N, female, 50 Ω, Maximum Input +30 dBm, ± 50 VDC GPS SMA, female External Power 5.5 mm barrel connector, 12 VDC to 14.5 VDC, < 5.0 A LAN Connection RJ48C, 10/100 Mbps USB Interface Two Type A, One 5-pin mini-B **Important:** Maximum continuous input is +30 dBm on the spectrum analyzer RF In (Type N, female, 50 Ω, ±50 VDC). The RF Out / Reflection In port is rated for a maximum input of +23 dBm, ±50 VDC.**Important:** All specifications and characteristics apply to Revision 2 instruments after 10 minutes of warm-up time over the 23 °C ± 5 °C temperature range, using internal reference signal, with calibration within the recommended 12 month period.**Important:** The High Accuracy Power Meter function (Option 0019) requires an external USB power sensor, sold separately.**Important:** CPRI Measurements (Option 750) operate over a temperature range of -10 °C to +45 °C, and CPRI measurements support the LTE technology.**Important:** Typical specifications shown in parentheses represent the mean value of measured units and do not include any guard-bands or uncertainties. They are not warranted. Typical specifications not in parentheses are not tested and not warranted; they are generally representative of characteristic performance.Recommended pairing: when line sweeping in tightly spaced antenna feedline environments or under active RF conditions, pair the MT8220T with Anritsu phase-stable test port cables — the InterChangeable Adaptor 15RCN50 series for changeable connector interfaces, or the 15RNFN50 / 15RDFN50 / 15RDN50 armored reinforced-grip series for cable and antenna line sweep applications. ## About this used unit - Warranty included on every pre-owned MT8220T sold by ValueTronics — see product page for specific terms. - Functional verification included — every unit is inspected and performance-tested by ValueTronics technicians against the manufacturer's published specifications before it ships. - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 675.0 USD - **Vendor:** Anritsu - **Type:** Spec An - **Tags:** Analyzers, Anritsu, Manufacturers, product_manual_group_1, Product_used, Spectrum ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 525.00 USD | In stock | | NIST Traceable with Full Data | 600.00 USD | In stock | | ISO IEC 17025 Accredited | 675.00 USD | In stock | ## Images - Anritsu MT8220T BTS Master High Performance Handheld Base Station Analyzer (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/mt8220t-anritsu-spectrum-analyzer-used) > Updated: 2026-05-30