# MPS620M Kepco DC Power Supply Used

**Additional Features:**

-   Voltage: 0-6V/5A, 0 to +20V/1A, 0 to -20V at 1A
-   Power: 70W
-   Linear low-noise voltage stabilization
-   Large display meters
-   10 turn voltage control for exceptional resolution
-   Convenient front panel binding posts for all outputs
-   0-6V supply backed with an overvoltage protector
-   ±20V outputs. Single knob controls both in a tracking mode

The Kepco MPS620M is a 70 Watt, triple output power supply specifically designed to meet the needs of IC/microprocessor experimenters. It is actually two linear (series pass) power supplies in one.

The first has a single 0-6V, 0-5A output backed up by an adjustable current limiter and overvoltage crowbar for digital work. The second has two tracked outputs, 0 to +20V and 0 to -20V, both rated at 0-1 Amp. The two power supplies are completely isolated from each other, sharing only the front panel meters and the chassis.

The 0-6V output is continuously adjustable with a front panel 10-turn control and is backed up by a fixed, rectangular current limit set to ~110% of maximum current. It is monitored by an overvoltage crowbar controlled by a locking type screwdriver adjustment on the front panel, setting range: 4 to 8V d-c. A crowbar ON LED is provided for convenient setting of the crowbar level.

The 0 to ±20V outputs are continuously adjustable with a single 10-turn front panel control. Tracking is better than ±1% +10mV. They are equipped with adjustable current limits. Adjustment range is ~10% to 105% of rated current. The 0 to ±20V outputs can be used in series to provide 0-40V (but not in parallel, since they share a common center terminal).

Both sections of MPS620M have the capacity to sustain short circuit current indefinitely. Two large (2-1/2") front panel meters display Volts and Amps for any of the three outputs, as chosen by a 3-position switch. Convenient front panel binding posts offer easy connection to your experiment. Rear barrier strips are provided for more permanent installation.

## Details

- **Price:** 0.0 USD - 153.0 USD
- **Vendor:** Kepco
- **Type:** Dc Supply
- **Tags:** DC Power Supply, Kepco, Manufacturers, Power Supplies & Loads, product_manual_group_1, Product_used

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| None | 0.00 USD | In stock |
| NIST Traceable | 93.50 USD | In stock |
| NIST Traceable with Full Data | 110.50 USD | In stock |
| ISO IEC 17025 Accredited | 153.00 USD | In stock |

## Images

- MPS620M Kepco DC Power Supply Used

---

> Source: [ValueTronics](https://valuetronics.com/products/mps620m-kepco-dc-power-supply-used)
> Updated: 2026-05-21