# Tektronix TDS714L 500 MHz Digital Storage Oscilloscope (Pre-Owned)

# Tektronix TDS714L 500 MHz Digital Storage Oscilloscope (Pre-Owned)

## Key Features At A Glance

-   500 MHz bandwidth and 500 MS/s sample rate across four channels
-   8-bit vertical resolution; over 11 bits with averaging and over 12 bits with Hi-Res
-   1 mV/div to 10 V/div sensitivity with 1% vertical accuracy
-   Record lengths to 8M points with 1 ns peak detect
-   Full GPIB programmability plus RS-232 and Centronics ports for automated test
-   Advanced triggering: edge, pulse-width, logic, setup/hold, glitch, slew-rate, and time-out
-   29 automatic measurements with statistics, plus FFT and advanced math
-   Floppy disk storage compatible with Iomega Zip and Zip Plus drives

The Tektronix TDS714L is a four-channel digital storage oscilloscope offering 500 MHz bandwidth and a 500 MS/s sample rate. Its high bandwidth and sample rate are intended to reveal the true signals that other scopes may be missing, and it combines a wide dynamic range, flat response, fast overdrive recovery, calibrated DC offset, 1 mV/div sensitivity, 1 ns peak detect, and internal calibration.

Listed applications for the TDS714L span power supply design and debug, electromechanical design and analysis, biomedical product development, automotive electronics design and debug, industrial control, and high-fidelity signal acquisition. These reflect work where capturing accurate, repeatable waveforms across four channels is central to the measurement task.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every used unit we sell is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.

## Brand Heritage

Tektronix, founded in 1946, has operated as a subsidiary of Danaher Corporation since its acquisition in 2007, while continuing to design and manufacture instruments under the Tektronix brand.

## Product Core & Specifications

Specification

Value

Features & Benefits

Bandwidth

500 MHz

Sample Rate

500 MS/s

Channels

Four

Vertical Accuracy

1%

Vertical Resolution

8-Bit, over 11 bits with Averaging and over 12 bits with Hi-Res

Peak Detect

1 ns

Sensitivity

1 mV/div to 10 V/div

Record Lengths

to 8-M Points

Channel Deskew

Yes

Storage

Floppy Disk Storage; Iomega Zip and Zip Plus Drive Compatible

Triggering

Advanced Triggering

Automatic Measurements

29 Automatic Measurements and Measurement Statistics

Math

FFT and Advanced Math

Histograms

Histograms with Statistics

Limit Test

Yes

FastFrame

FastFrame Time Stamp

Programmability

Full GPIB Programmability

Warranty

Three-Year

Compliance

CE Marking

> **Important:** Application-specific software packages require a hard disk drive (Opt. HD or Opt. 2M).

> **Important:** The video trigger that provides line and field selection for NTSC, PAL, and HDTV standards is optional.

> **Important:** Active and differential probes operate via the TEKPROBE interface; the P6243 active probe achieves the full 500-MHz bandwidth on the TDS714L.

> Recommended pairing: the Tektronix P6243 active probe is designed for the TDS714L and can achieve its full 500 MHz bandwidth while providing low loading.

## About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

-   Warranty included
-   Functional verification included
-   Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
-   Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 0.0 USD - 300.0 USD
- **Vendor:** Tektronix
- **Type:** Dig Oscilloscope
- **Tags:** Dig Oscilloscope, Digital, Inc., Manufacturers, Model 714, Oscilloscopes, Pre-Owned, product_manual_group_1, Product_used, TDS714, TDS714L, Tektronix

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| None | 0.00 USD | In stock |
| NIST Traceable | 225.00 USD | In stock |
| NIST Traceable with Full Data | 262.50 USD | In stock |
| ISO IEC 17025 Accredited | 300.00 USD | In stock |

## Images

- Tektronix TDS714L 500 MHz Digital Storage Oscilloscope (Pre-Owned)

---

> Source: [ValueTronics](https://valuetronics.com/products/tds714l-tektronix-digital-oscilloscope-used)
> Updated: 2026-06-03