# Tektronix DPO7354C 3.5 GHz Digital Phosphor Oscilloscope (Pre-Owned) # Tektronix DPO7354C 3.5 GHz Digital Phosphor Oscilloscope (Pre-Owned) ## Key Features At A Glance - Four-channel architecture across all models, with bandwidth from 500 MHz to 3.5 GHz spanning the series - Up to 40 GS/s real-time sampling; 25 Mpoint record length standard on all channels, optional up to 500 Mpoints - \>250,000 wfms/s capture rate via FastAcq digital phosphor technology on all four channels - Pinpoint triggering with over 1400 trigger combinations plus Visual Trigger and Search - 53 automated measurements with waveform histograms and FFT analysis standard - 12.1 in. (307 mm) XGA color display with integrated touch screen - 10/100/1000BASE-T Ethernet, GPIB (IEEE 488.2), and USB 2.0 host ports; LXI Class C compliant - Optional serial triggering, decode, and compliance test packages via separate software licenses The Tektronix DPO7000C Series is a family of four-channel Digital Phosphor Oscilloscopes built to support engineers throughout the design cycle, from prototype turn-on to production testing. The series pairs signal acquisition performance with integrated analysis so a single instrument can capture and diagnose both analog and serial bus signals in complex designs, helping engineers find and resolve problems quickly. A digital phosphor oscilloscope captures electrical signals as waveforms — voltage plotted against time — and uses color-graded intensity to show how often parts of a signal occur. This makes amplitude, frequency, timing, and signal shape visible at a glance, and highlights infrequent anomalies that a conventional display can miss. ValueTronics stocks test and measurement equipment directly from our own 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. ## Brand Heritage Tektronix was founded in 1946 and operated as an independent company for decades. It was acquired by Danaher Corporation in 2007, and in 2016 it became part of Fortive Corporation, which was spun off from Danaher that year. ## Compare Other Models in This Series The DPO7000C Series comprises four 4-channel Digital Phosphor Oscilloscopes — the DPO7054C, DPO7104C, DPO7254C, and DPO7354C — that share a common feature set and differ primarily in analog bandwidth and maximum real-time sample rate. All four models offer the same Pinpoint triggering, Advanced Search and Mark, 53 automated measurements, 12.1 in. touch-screen display, and 25 Mpoint standard record length. Because the models share architecture, capabilities such as digital phosphor acquisition, FastAcq, FastFrame, the TekVPI probe interface, and Windows-based connectivity apply across the series, while the model number selects the bandwidth and sampling tier appropriate to the application. Each pre-owned model below is its own dedicated product page with condition-matched pricing. Choose the bandwidth and sample-rate tier that fits your application, and the corresponding page will show the specifications and pricing for that specific model. The four models step through bandwidths of 500 MHz (DPO7054C), 1 GHz (DPO7104C), 2.5 GHz (DPO7254C), and 3.5 GHz (DPO7354C), with corresponding differences in typical rise time and maximum real-time sample rate — the DPO7054C and DPO7104C reach 20 GS/s on one channel, while the DPO7254C and DPO7354C reach 40 GS/s on one channel. The comparison table below details the bandwidth, rise time, sample rate, and noise figures for each model. Some capabilities are tied to specific models: the optional 500 Mpoint record length (Opt. 10RL) and the 64-bit NRZ serial pattern trigger with clock recovery (Opt. ST1G) apply to the DPO7254C and DPO7354C, while Opt. 2SR — which doubles the maximum real-time sample rate to 40 GS/s — applies to the DPO7104C. Refer to the comparison table and options for the differences relevant to your selection. Model Bandwidth Max Sample Rate (1 ch) Rise Time (10%-90%, Typical) **DPO7354C** 3.5 GHz 40 GS/s 115 ps DPO7054C 500 MHz 20 GS/s 460 ps DPO7104C 1 GHz 20 GS/s 300 ps DPO7254C 2.5 GHz 40 GS/s 160 ps Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - P6139B - One passive voltage probe per analog channel (500 MHz, 10X, 8 pF) - Front cover - 071-298x-xx User Manual (please specify language when ordering) - GPIB programmer's reference PDF file - Performance verification procedure PDF file - Advanced Search and Mark, DPOJET Essentials, Visual Trigger and Search, Limit Test, and SR-CUST Custom serial analysis all included standard - Accessory pouch - Mouse - Calibration Certificate documenting measurement traceability to National Metrology Institute(s), Z 540-1 Compliance and ISO9001 - Power Cord (please specify power plug option when ordering) - One-year warranty ## Product Core & Specifications Specification Value Model-Specific Performance Input Channels 4 Bandwidth 3.5 GHz Rise Time 10% to 90% (Typical) 115 ps Rise Time 20% to 80% (Typical) 95 ps Effective Number of Bits (Typical, sine wave input at instrument bandwidth, 50 mV/div, 50 Ω Input Impedance, maximum sample rate, 20k point record length) 5.6 bits Maximum Sample Rate (1 ch) 40 GS/s Maximum Sample Rate (2 ch) 20 GS/s Maximum Sample Rate (3-4 ch) 10 GS/s Maximum Equivalent Time Sampling Rate 4 TS/s Maximum Record Length with Standard Configuration 125 M (1 ch), 50 M (2 ch), 25 M (3-4 ch) Maximum Record Length with Option 5RL 250 M (1 ch), 125 M (2 ch), 50 M (3-4 ch) Maximum Record Length with Option 10RL 500 M (1 ch), 250 M (2 ch), 125 M (3-4 ch) Time Resolution (in ET/IT mode) 250 fs Random Noise (RMS, typical, sample mode, full BW, maximum sample rate) 500 mV step gain 23.5 mV 200 mV step gain 10.9 mV 100 mV step gain 6.6 mV 50 mV step gain 2.35 mV 20 mV step gain 1.03 mV 10 mV step gain 0.61 mV 5 mV step gain 0.41 mV 2 mV step gain 0.19 mV 1 mV step gain 0.12 mV > **Important:** Maximum input voltage: ±150 V (1 MΩ input, derated at 20 dB/decade to 9 VRMS above 200 kHz); 5 VRMS with peaks ≤ ±24 V on the 50 Ω input. > **Important:** Several compliance-test options require a separately-ordered test fixture not included with the option: Option USB2 requires the TDSUSBF USB Test Fixture; Options BRR and ET3 require the TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture. > **Important:** Option 10RL (500 M record length) and Option ST1G (64-bit NRZ Serial Trigger), Opt. D-PHY, HSIC, SV23, SV24, SV27 and related ≥2.5 GHz options are available only on the DPO7254C and DPO7354C models. > **Important:** Option 2SR (double sample rate to 40/20/10 GS/s) is available on the DPO7104C only. > **Important:** USB 2.0 High-speed decoding/search and Option DDRA / SR-PCIE are available only on models of ≥1 GHz bandwidth. > **Important:** Floating licenses (DPOFL- prefix) and field upgrades (DPO-UP prefix) are available as alternative ordering methods for the license-key enabled options listed. > Recommended pairing: this series accepts Tektronix TekVPI probes such as the TAP3500 active probe and TCP0030A current probe for automatic scaling and direct current-probe attachment without a separate power supply. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 300.0 USD - **Vendor:** Tektronix - **Type:** Dig Oscilloscope - **Tags:** Dig Oscilloscope, Digital, DPO7354, DPO7354C, Inc., Manufacturers, Model 7354, Oscilloscopes, Pre-Owned, product_manual_group_1, Product_used, Tektronix ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 225.00 USD | In stock | | NIST Traceable with Full Data | 262.50 USD | In stock | | ISO IEC 17025 Accredited | 300.00 USD | In stock | ## Images - Tektronix DPO7354C 3.5 GHz Digital Phosphor Oscilloscope (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/dpo7354c-tektronix-digital-oscilloscope-used) > Updated: 2026-06-02