# LeCroy LP142 100 MHz Digital Oscilloscope (Pre-Owned) # LeCroy LP142 100 MHz Digital Oscilloscope (Pre-Owned) ## Key Features At A Glance - 100 MHz analog bandwidth (DC–100 MHz) with a 500 MS/s maximum single-shot sampling rate on both channels - 25 GS/s equivalent-time sampling for up to 40 ps time resolution on repetitive signals - 100 kpoints long acquisition memory per channel (5 kpoints in short mode) - Vertical accuracy within 2% and horizontal accuracy of 50 ppm (0.005%) - 13 automatic measurements, dual cursors, and a hardware five-digit frequency counter (1 Hz–100 MHz) - 5.7" (145 mm) backlit LCD with X-Y display and an on-screen Help function - RS-232C interface and Centronics data output for waveform and data transfer - Built-in line thermal printer plus ATA card and 3.5" floppy storage with TIFF/BMP output The LeCroy LP142 is a compact digital oscilloscope from the LiteRunner line. At approximately 6.6 lbs (3 kg) and measuring 8.4" x 6.7" x 6.5" (214 x 170 x 166 mm), it is built to be carried easily and to fit onto crowded workbenches, combining a two-channel acquisition system, an integrated 5.7" backlit LCD, and built-in data-output hardware in a single portable package. An oscilloscope captures electrical signals as waveforms—voltage plotted against time—letting an engineer see a signal's amplitude, frequency, timing, and shape. The LP142 supports this work with cursors and measurement parameters and is suited to troubleshooting signal interruptions, with an on-screen Help function that explains menu functions for both newer and experienced users. ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. ## Brand Heritage LeCroy Corporation was acquired by Teledyne Technologies in 2012 and has since operated under the Teledyne LeCroy name. ## Product Core & Specifications Specification Value Acquisition System (Common to CH1, CH2) Sensitivity 2 mV/div - 10 V/div (1-2-5 steps) (0.8 mV/div zoomed) Bandwidth DC - 100 MHz (frequency cutoff is 10 Hz for AC coupling) Max single-shot sampling rate 500 MS/s Equivalent sampling mode 25 GS/s Peak detect 500 MS/s Resolution 8-bit Acquisition Memory Short - 5 kpts/ch; long - 100 kpts/ch Storage Modes Normal, equivalent sampling, peak detect, average, roll Accuracy Vertical accuracy Within 2% Horizontal accuracy 50 ppm (0.005%) Triggering System Modes Auto, Normal, Single Sources CH1, CH2, EXT Types Edge, Event, TV Event trigger Count, Burst, Missing, Extra Timebase System Time/div range 5 ns - 50 s/div (1-2-5 steps) Roll Mode 500 MS - 1000 s/div Display Functions Display 5.7" (145 mm) backlit LCD display X-Y display X = CH1, Y = CH2 Help function Available on screen in reverse video Waveform Storage Media ATA card, floppy disk (3.5") Data type Setup, waveform Record format Binary and ASCII formats are available for waveform data Comment Text comments can be appended to waveform files Auto copy Waveforms can be automatically copied to a storage device after each trigger Math and Measurement Functions Cursors delta V, delta t, 1/delta t, V at t Parameters Tr, Tf, Vrms, Vmean, etc. (total 13 items) Arithmetic functions +, -, x Frequency counter Five display digits, 1 Hz - 100 MHz frequency range Other Features Auto setup Automatically setup V, H range and trigger for repetitive signal Interface RS-232C Data output Centronics Built-in printer Line thermal printer, roll print available Floppy, ATA card Output format TIFF, BMP Centronics formats DPU-414, ESC-P09, ESC-P24, PC-PR201, TIFF, BMP Power Supply Voltage range AC 100 - 240 V Power consumption 90 VA max (with built-in printer operation) Dimensions and Weight Dimensions (width, height, length) 8.4" x 6.7" x 6.5" (214 mm x 170 mm x 166 mm) Weight Approx. 6.6 lbs (3.0 kg) excluding accessories > **Important:** AC coupling applies a 10 Hz low-frequency cutoff. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 262.5 USD - **Vendor:** LeCroy - **Type:** Dig Oscilloscope - **Tags:** Dig Oscilloscope, Digital, Inc., LeCroy, LP142, Manufacturers, Model 142, Oscilloscopes, Pre-Owned, product_manual_group_1, Product_used, Teledyne LeCroy ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 187.50 USD | In stock | | NIST Traceable with Full Data | 225.00 USD | In stock | | ISO IEC 17025 Accredited | 262.50 USD | In stock | ## Images - LeCroy LP142 100 MHz Digital Oscilloscope (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/lp142-teledyne-lecroy-digital-oscilloscope-used) > Updated: 2026-06-03